351925-1-S-Whirlpool-3977767           -High Limit Thermostat
351925-1-S-Whirlpool-3977767           -High Limit Thermostat 351925-2-S-Whirlpool-3977767           -High Limit Thermostat 351925-3-S-Whirlpool-3977767           -High Limit Thermostat

High Limit Thermostat

PartSelect Number PS351925

This hi-limit thermostat with Terminal Extension Arm acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 221 degrees Farenheit, this piece will shut down power to the heating element until it drops by 80 degrees Farenheit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Takes too long to dry.
  • Will not start.
  • Temperature too hot.
  • Shuts off too soon on auto dry.
  • Will not shut off.
  • Compare At

    $14.02
  • You Save

    $2.34
  • Your Price

    $11.68
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 52 reviews What's this?
46-52 of 52
 

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerKate from Nashville TN

Dryer running with no heat

I am nine months pregnant and can't believe how easy it was. Took the back panel off and saw that the heating element looked fine. I checked to three thermostats and found the two that were dead. I found the two online that looked like the two i needed, ordered the parts and they came in 2 days. It was sooo easy i can't believe i actually thought about calling someone to come fix it for me.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerKimberly from Willows CA

The dryer was working fine, then just stopped.

I pulled the back off, replaced the parts, put back together, plugged it in and WALLA! it worked and has for a week. Thank you partSelect.com.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerDonald from Lusby MD

The dryer stopped heating. I removed the back of the dryer to find a fried thermostat and wire.

I went on partsselect.com's web site, punched in the model number and easily found the parts I needed. Parts arrived in two days. Repairs went well, especially when my wife was my tool assistant! I recommend this site as a must for do it yourself repairs that will save you a lot of money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

23 of 614 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerDave from Hudson WI

Dryer not starting

Read the info' about the possible causes, checked out the Thermal fuse with a multimeter found it had blown. Cleared out debris from the blower wheel and ducting, replaced the themostats and fuse. Dryer started up....should be good for another 5 years!

Help other customers find the most helpful instructions.

Were these instructions helpful?

28 of 629 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Ravenel SC

No heat, drum would turn, fan would run.

Ordered all of the thermostats and fuses. Unplugged appliance. Removed back panel. Replaced all items, still did not heat. I removed the 2 screws from the filter housing, and lifted the top. I disconnected the door sensor. I removed the 2 5/16" retaining bolts and removed the front cover, supported the drum and discovered a loose connection on the harness that connects to the drum motor. (Engineered not to heat up unless everything else is functional, including drum rotation.) I reestablished a good connection and buttonned her back up. Now i have spare thermostats.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 611 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers

CustomerWilford from Colonial Heights VA

Running but no heat

I read the repair stories on PartSelect.com and decided to buy the thermostat, fuse, and heating element so I was sure to fix whatever the problem was on the first try. I replaced the thermostat fuse and hi-heat thermostat before finding the heating element was broken. I replaced it and even with my 4 and 6 year old helpers, was finished in 20 minutes. Thanks to the PartSelect schematic, I knew what I was looking for and it was as easy as in the picture. I saved time and money thanks to PartSelect.com and other user comments on the site.

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 623 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerLucio from North Miami Beach FL

Blowing cool air only.

Removed & Replaced heating element, thermostat, thermal fuse, and walla, it's done. Just Three bolts to remove. Less than fifteen minutes work!! Works great!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-52 of 52