351870-1-S-Whirlpool-3977456           -Push-to-Start Switch
351870-1-S-Whirlpool-3977456           -Push-to-Start Switch 351870-2-S-Whirlpool-3977456           -Push-to-Start Switch 351870-3-S-Whirlpool-3977456           -Push-to-Start Switch

Push-to-Start Switch

PartSelect Number PS351870

This part starts the drying or washing operation.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Compare At

    $20.60
  • You Save

    $3.43
  • Your Price

    $17.17
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 4 reviews What's this?
1-4 of 4
 

46 of 51 people found this instruction helpful

Parts Used

  • Push-to-Start Switch

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDennis from Port Orchard WA

Broke start switch while moving

Turned off the power.Pulled the dryer out, removed the screws from the control cover panel, unplugged the switch, pressed the release clip the did the opposite to install new switch. Replaced the back panel, put the nob on and it looks as good as new.Turned on the power.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 23 people found this instruction helpful

Parts Used

  • Push-to-Start Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerGrace from New Smyrna Beach FL

Push to start switch was not working

Removed the old one and installed the new one! What impressed me the most was the amount of time for delivery, one day! Actually it came before 24 hrs!!! Very impressive! I would highly recommend this company!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 12 people found this instruction helpful

Parts Used

  • Push-to-Start Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCharles from Fairfax OK

Broken push to stat switch

Removed back cover, removed broken switch, replaced with new switch, replaced back cover, told wife her dryer was fixed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 17 people found this instruction helpful

Parts Used

  • Push-to-Start Switch

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMaura from Newtown CT

Dryer not working

After unplugging and removing the back cover from the dryer, locate the push button switch. Slide putty knife around outer cover to unhook catch. Replace with new push button switch. My dryer is still not working, but this was a simple replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4