Timer - 60Hz

PartSelect Number PS351370

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Compare At

    $155.04
  • You Save

    $25.84
  • Your Price

    $129.20
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

13 of 15 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerPeter from Syracuse NY

Problem with cycles stopping at the wrong point, problems with water temp.

The video for the water inlet valve/solenoid is excellent to show you how to get the top off so you can get to the timer. Then just two tips:

1) when you pull the existing knob off the front per the instructions on the new timer, there is a small screw on the face of the top unit, next to the timer spindle, that must be removed - otherwise the timer won't slide out from under the tabs. Then, looking at the existing timer from behind, there is a thin tab on the left that needs to be lifted up about 1/8", which will allow you to slide the timer unit to the left about 1/4" to get out from the 3 other tabs, and lift it out.

2) be very careful to line up the timing marks for the timer (old and new) and the knob markings, otherwise the cycle text on the actual face of the top unit won't line up correctly with what the knob is pointing to, and nothing will seem to work right!

Ultimately, for us, the problem ended up being the water intake valve, but I think the above will help anyone with a timer issue.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 13 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerBruce from Charlotte NC

Washing machine timer wouldn't advance

smooth and easy....removed the cover from on top of the washer, removed the old timer, installed the new timer, re-attached the cover, watched wife smile....

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2