Timer - 60Hz 115V

PartSelect Number PS351267

Manufacturer Part Number 3954071
Manufactured by Whirlpool

The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Compare At

    $166.15
  • You Save

    $27.69
  • Your Price

    $138.46
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 5 reviews What's this?
1-5 of 5
 

9 of 10 people found this instruction helpful

Parts Used

  • Timer - 60Hz 115V

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDavid from Clear Lake WI

Timer would not advance

First I watched the "how to video" that corresponds with the part I ordered on the Parts Select web site. The instructions given in the video were so clear and complete that the job was incredibly easy. Parts Select makes appliance repair so easy that Im willing to bet that even the "May Tag" repair man becomes more lonely

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Timer - 60Hz 115V

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerJames from Cherry Hill NJ

Timer would not function in all cycles

Removed time knob and dial. Removed two screws hoding Console. Lifted Console up and laid it back. Removed two screw holding timer to control bracket. Unpluggd timer connections. Plugge connections into new timer. Replaced two screws holding timer to control bracket. Placed Consel in positon and replaced screws holding console to base. Replacd timer knob and dial. Tested wassher through cycle.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerRichard from Bakersfield CA

After filling, did not drain, spin, or timer advance to next cycle

1. Removed wet clothing, evacuated water using Python No Spill Aquarium Maintenance System. No mess or water on the floor. 2. Turned off hot & cold water supplies, and unplug unit before moving. 3. Removed unit water supply hoses, and moved unit. The drain hose remained attached while moving to prevent spills. 4. Removed unit from laundry room, and took to the garage on a dolly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Timer - 60Hz 115V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWayne from Hnedersonville NC

Washer stopped midcycle

Took out two screws on back of top consule. Lifted consule up and over to expose timer and wires. Removed two screws holding timer. Undid three electrical connectors. Removed timer. Put in new timer and plugged in connectors. Replaced screws and walla. Working fine. Thanks PartSelect!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Timer - 60Hz 115V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerRichard J. from South Huntington NY

Wash cycles not moving forward

First UNPLUG THE WASHING MACHINE. Then unscrew the knob and then pull off the bezel (with the arrow on it). Then remove two screws alont the top-back of the unit. Then the two screws located at the base of the control panel section (about six inches from the top - in the back). The cover slides off to expose the timer. There are two more screws on the front (under where the knob was located) that hold the timer in place - they need to be removed. Then pull out the three wire harnesses (I saved the small one for last since it was the hardest to remove - I needed a small screw driver to push down the small plastic latch). Switch out the old timer for the new one and reverse all the steps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5