6 of 12 people found this instruction helpful
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerJAMES from OAK CREEK WI
Wash machine stopped at the first rinse cycle .
I removed the two phillips screws mounting the top counsle to the wash machine removed the two phillips screws screwed to the plastic hinge device on the back side. I was then able to seperate the top from the base of the washer.Discnnected the handle to the timer according to note on the timer, removed the wire harness to timer. Disconnected wires to the buzzer. Removed the two phillips screws under timer knob the slide timer to the right and pull out.
5 of 10 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers, Socket set
CustomerDwain from Attica IN
Top agitator didn't engage; timer had dead spots in some cycles
Removed agitator per diagram and determined what real problem was, and simply replaced parts. Timer was a no brainer...it didn't work and the replacement is a single unit repair item.