Timer - 60Hz

PartSelect Number PS351117

Pull tab at back of timer to release the knob.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not drain.
  • Compare At

    $171.38
  • You Save

    $28.56
  • Your Price

    $142.82
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.9 / 5.0, 4 reviews What's this?
1-4 of 4
 

43 of 50 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerGerald from Chicago IL

Washer would not complete cycles; typically would wash only but not drain and spin

Removed upper back and timer knob and then timer and wire jacket.
After replacing timer, washer at first did not work, then completed one load of wash, then on second load, it stopped at end of wash cycle, except when I leaned on lid which evidently closed the spin cycle switch which appears to be loose.
So I'm saving the old timer which may be OK.

Help other customers find the most helpful instructions.

Were these instructions helpful?

37 of 41 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerTERRY from LAKELAND FL

Would not rinse or spin

Do not assume it is timer...my bad...had washer apart to begin with , looking for problem...(ALWAYS look at the lid switch,I did not)when i broke the timer,and realized that was NOT the problem,I ordered lid switch and timer , installed both in less than 20 minutes , putting entire washer back together about an hour.Hooked it up , and POW!!!! IT WORKED!! lol!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

25 of 27 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

Customerluz from New York NY

Washer will not change to any cycle and lid switch will stay on position.

Real good your web site gave me good repair tips.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 19 people found this instruction helpful

Parts Used

  • Timer - 60Hz

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerDamian from north port FL

Would not rinse or spin

relaced the timer, wich was not the prob. it was the switch on the lid that was bad , it was a seald switch that just came apart from what i have no idea, so i repaired the switch,

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4