3510420-1-M-GE-WB01K10112-Top Electrode Mounting Clip
Part Location Diagram of WB01K10112 GE Top Electrode Mounting Clip
See part 168 in the diagram
3510420-1-S-GE-WB01K10112-Top Electrode Mounting Clip 360 view
( Grid squares measure 1x1 inch )
3510420-1-S-GE-WB01K10112-Top Electrode Mounting Clip 3510420-2-S-GE-WB01K10112-Top Electrode Mounting Clip 3510420-3-S-GE-WB01K10112-Top Electrode Mounting Clip 3510420-1-S-GE-WB01K10112-Top Electrode Mounting Clip 360 view
Part Location Diagram of WB01K10112 GE Top Electrode Mounting Clip
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Top Electrode Mounting Clip WB01K10112

 Fits your ZGU36KSK1SS!

Rated by 4 customers 

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

$ 13.71
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your ZGU36KSK1SS!
PartSelect Number PS3510420
Manufacturer Part Number WB01K10112
Manufactured by GE
Product Description

Top Electrode Mounting Clip Specifications

Sold individually.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start | Gas igniter glows | but will not light
This part works with the following products:
Range, Cooktop.
This part works with the following products:
General Electric, Kenmore, Hotpoint.
Part# WB01K10112 replaces these:
AP5650822, WB01K10007, WB01X10379, WB1K10007
Back to Top
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Water got into the spark igniter switch and caught fire
watched a video, then took it apart and replaced parts
Other Parts Used:
Top Electrode Mounting Clip HARNESS WIRE BURNER Spark Igniter Switch and Harness Assembly Top Burner Spark Electrode Knob and Clip Grease Filter
  • Mike from TRACY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
some of electrodes not working at times,found were bad,wires had some insulation missing, clips looked burnt,found all new parts replaced
the electrodes on this model have to be removed before you can raise cooktop, once cooktop is raised remove wire from burner bracket, use needle nose pliers to squeeze bottom of clip,remove &replace with new parts.
  • Dana from LEEDS, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No spark at one burner
Other writers have claimed that this is a "really easy" job. They apparently had one or more of: 1. Less used appliance. 2. Never spilled anything on the cooktop 3. Much better luck. In my case, the apparently faulty igniter absolutely would not pull out. I removed it by removing the burner retaining screws and prying under the burner casting. Having done that, I cleaned the igniter and tested it again. None of the igniters worked, and I could hear arcing under the cooktop, indicating one or more of the igniter HV wires had somehow grounded. After a fruitless search for instructions on raising the cooktop, I stumbled upon an envelope glued to the back of the range that told me to remove all four burners and igniters and to release the cooktop by inserting a thin screwdriver under the front edge about 3" from each end to release the spring clips. Several of the igniters were cemented in place with caramelized sugar and required some pretty vigorous prying to dislodge. If I had this to do again on a range that had been ridden hard, I wouldproactively order a full set of gaskets (they're fragile), the HV harness (even if it doesn't leak as mine did, the igniter connectors degrade from heat exposure), a set of electrode mounting clips (none of them were much use either), and enough igniters to replace any that don't work plus at least one. I pried out the recalcitrant igniters; in retrospect I should have crushed them because of the severe risk imposed by prying of breaking either a burner casting or the cooktop -- either of which are far more expensive than another igniter.
Read less
Other Parts Used:
HARNESS HV Burner Gasket Spark Igniter Burner Gasket Burner Gasket Top Electrode Mounting Clip
  • Michael from Weatogue, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
43 of 59 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Igniter no longer worked
remove all loose components on range top (grates, caps, disbursement / diffuser heads. Take a T-15 screw driver and unscrew each of the three screws on each burner. Have a large flat headed screwdriver ready. Lift up on the front lid of the range, it should life about 1/4 inch. There are two clips that hold it down, about 6 - 8 inches in from either side. Press then towards the back (away from you) one at a time, while lifting on the lid.. it should pop free. WARNING: if you did not remove the torx screws first, be careful are you will now bend the gas lines running to the burner. Once loose, remove the old clip from the igniter, so that it lifts free. unplug the igniter from the electrical cable (pulls out from bottom). attach new clip to new igniter and re-attach electrical line to new igniter. close lid and re-attach all torx screws. Reassemble range top and you are complete.
Read less
Other Parts Used:
ELECTRODE TOP Top Electrode Mounting Clip
  • BRAD from Halethorpe, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
13 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Top Burner Spark Electrode
$11.08
$11.08
  No Longer Available
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS3510420
Manufacturer Part Number: WB01K10112
Brand
Model Number
Description
General Electric
147210
Range
General Electric
147211
Range
General Electric
147212
Range
General Electric
147213
Range
General Electric
147260
Range
General Electric
147261
Range
General Electric
147262
Range
General Electric
147263
Range
Kenmore
36272181890
Range
Kenmore
36272181891
Range
Kenmore
36272188890
Range
Kenmore
36272188891
Range
Kenmore
36272191890
Range
Kenmore
36272191891
Range
Kenmore
36272191892
Range
Kenmore
36272198890
Range
Kenmore
36272198891
Range
Kenmore
36272198892
Range
Kenmore
36272201890
Range
Kenmore
36272201891
Range
Kenmore
36272201892
Range
Kenmore
36272201893
Range
Kenmore
36272205891
Range
Kenmore
36272205892
Range
Kenmore
36272205893
Range
Kenmore
36272206891
Range
Kenmore
36272206892
Range
Kenmore
36272206893
Range
Kenmore
36272208891
Range
Kenmore
36272208892
Range
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Top Electrode Mounting Clip
$ 13.71
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.