Quick Question!

Have you ever purchased from PartSelect.com before?

3508094-1-S-Whirlpool-W10480709-CUTOFF-TML
3508094-1-S-Whirlpool-W10480709-CUTOFF-TML 3508094-2-S-Whirlpool-W10480709-CUTOFF-TML 3508094-3-S-Whirlpool-W10480709-CUTOFF-TML http://www.partselect.com/Schematics/Maytag/I81QMBNN.gif

CUTOFF-TML

PartSelect Number PS3508094

The thermal cut-off (fuse) is meant to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you must replace it. The hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this piece will shut down power to the heating element.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Takes too long to dry.
  • Compare At

    $50.36
  • You Save

    $8.39
  • Your Price

    $41.97
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

23 of 43 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: brendan from brick q, NJ

The dry was getting hot but not for long, then not at all.

Once the coils for the gas valve got hot they failed and shut the gas vavle off, we ended up changing the coils which fixed the problem but part select held up there end of shipping out these parts which we could not get localy. so if your dry ignites some time and or not for long its either these coils or the cycling thermostat which will casue the same conditions because the the cycling thermostat controls the coil. good luck!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: stacy m from akron, OH

No heat

First time ever repaired anything let alone a dryer, I watch the video and followed instructions, was pretty simple, Works like a charm

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2