8 of 14 people found this instruction helpful
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Gary from Maple Grove, MN
Timer was bad.
I removed 4 screws holding the trim and timer mechanism.There is 1 phillips screw holding the timer to remove,and a plastic piece to pull out from the back of the timer.I easily pulled it off,and the timer fell right off.I removed the wiring harness,and removal was done.Installing the timer was a reversal of the process.Slide the timer in place.install 1 screw,snap wiring harness on.push timer dial on,shroud back in place and 4 screws to put back in. The whole process took me 15 minutes,and is a very simple fix.My wife was thrilled,and I was the hero!