http://www.partselect.com/Schematics/GE/GE_Thumb/00125020i01.gif
See part 866 in the diagram

DISPENSING DET ASM

PartSelect Number PS3506782

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Will not dispense detergent or Jet Dry.
  • Compare At

    $72.02
  • You Save

    $12.00
  • Your Price

    $60.02
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.7 / 5.0, 3 reviews What's this?
1-3 of 3
 

6 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerRandell from Riverside CA

Smart dispensor not despensing detergent

Removed front Door panel, by removing screws from back side of door, replaced pump, door handle actuator & spring. I did not have to remove the dishwasher from the counter (built in). Repairs took all of 20 min. and dishwasher was back in service. The price I paid for all the parts from PartSelect, was less then G.E. Repair Service wanted just to come out and look at the dishwasher ($99.50 plus parts & labor). The parts that online G.E Appliance was selling were about 25% to 40% higher in price. With total cost I figured I saved about $250.00 to $325.00 by doing it myself and the help of PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 9 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerDale from Victor NY

Plugged detergenent pump & noisy blower

Access to the parts was easy. Simply remove the outer door cover.

The only problem was that I had to disassemble and reassemble the dishwasher two times. Other than that, the actual repair was very simple; remove the old, replace with new and test with the built in diagnostic.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 84 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerMark from Omaha NE

Control module went out - causing the heating element to super heat, melting several of the plastic interior parts

I replaced the control module, and effected plastic interior parts - tested wihout heat, then re-tested with heat dry - performed beautifully. This is a pretty expensive unit that would cost around $1500 to replace new. And, Sears wanted $1500 to repair, so I saved a bunch doing it myself for about $350.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3