Lid Switch Assembly

PartSelect Number PS350431

This part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not drain.
  • Will Not Start.
  • Pumps but will not spin.
  • Timer will not advance.
  • Will not agitate.
  • Will not fill with water.
  • Compare At

    $33.68
  • You Save

    $5.61
  • Your Price

    $28.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 46 reviews What's this?
 

5 of 8 people found this instruction helpful

Parts Used

  • Lid Switch Assembly

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers, Wrench set

Customermaria from san Marcos, TX

Washer not draining

but switch fixed

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Lid Switch Assembly

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerBeth from Vallejo, CA

Heavy wash broke the switch assembly

Honestly, it took more time to figure out how to get at the dang thing than it did to replace the assembly. One screwdriver for the whole project. Very easy to figure out (once I got into the machine casing, anyway).

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lid Switch Assembly

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJason from Goldsboro, NC

Broken lid switch

My wife shut the lid to the washer with something stuck in the lid switch and it broke the pieces that hold the switch to the machine. I backed out the screws and put the new switch in. Couldn't really get to the screw that held the ground in place so I clipped that wire and used a wire nut to splice it to the new switch. Running the wires up to the connection wasn't that hard. Remembering to plug the connection in would have made this a lot quicker. Nice upgrade to the part too. That piece of metal under the switch is sure to keep it from breaking again anytime soon. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lid Switch Assembly

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Wrench (Adjustable)

CustomerKeynold from Royal Palm Beach, FL

The machine stopped after the first cycle and would not drain the water.

I unplugged the machine,
and i removed the side caps on either side of the control panel; i removed one screw on each side of the control panel.
I removed the control panel from the machine.
I located the wiring for lid switch and i unplugged it.
I installed the new switch the same way the old one was installed just as stated the "PartSelect" instructions.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lid Switch Assembly

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerThurlow from Lindsborg, KS

Broken lid switch/washer would not spin

Before starting I watched the video from your site on exactly how to do the job. I'm glad that it was there because this machine can apart differently that any I have seen before. Following the instuctions made for a simple repair and a happy wife.

Help other customers find the most helpful instructions.

Were these instructions helpful?