3502191-1-S-Whirlpool-W10440740-Baseless Lamp
3502191-1-S-Whirlpool-W10440740-Baseless Lamp 3502191-2-S-Whirlpool-W10440740-Baseless Lamp 3502191-3-S-Whirlpool-W10440740-Baseless Lamp

Baseless Lamp

PartSelect Number PS3502191

This is a small light bulb.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Won’t turn on.
  • Compare At

    $23.95
  • You Save

    $3.99
  • Your Price

    $19.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 1.8 / 5.0, 5 reviews What's this?
1-5 of 5
 

39 of 61 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerLance from Angels Camp CA

Light out and door spring broken

Remove side deco strips to remove screws that hold to cabinet. Pull microwave out and set on saw horses (power cable should be long enough to do this). Remove screws to top cover and lift enough to remove all connectors from the front panel pcb. Remove grounding wires from next top lid. Remove connectors from transformer on rigt side and the two connectionss at the rear fan assy. Remove top cover/vent assy. Remove the next top cover to get access to the light bulb assy. Use a cloth or kleenex while handling the new bulb as you replace it. The clip thta holds the bulb is easily released and use reverse procedure when assembling. For springs those can be replaced without removing the microwave from the cabinet. Remove the 2 screws that hold the door together accessed from the inside of the door at top. Pull door up to release from the clip at the bottom. Remove the broken spring and replace with new one. Use a screwdriver to help twist the torsion spring to clip into place. Replace door assy in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 16 people found this instruction helpful

Parts Used

  • Baseless Lamp

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsNutdriver, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerRobert J from Laguna Vista TX

This is a halogen light bulb. The bulb would not burn.

This is the second time this has occurred. The first was still in original warrenty. It took two Sears servicemen to dis mantel and obtain access to the bulb. One had to hold it up in the cabinet while the other took off the tope to get to the bulb. I purchased an additional extended warranty for three more years but when I called this time they said that light bulbs were not covered. I had to furnish the bulb and they would install it for free. I am waiting for them to come and do it again. Your price even with shipping cost was cheaper than ordering the part from Sears.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 16 people found this instruction helpful

Parts Used

  • Baseless Lamp

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerPeter D. from Smithtown NY

Lamp replacement

1)Power off 2) Remove frame covering front timer display - screw on the bottom 3) unscrew time display - 4 screws 4) unsnap lamp spring clip 5)replace lamp

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 13 people found this instruction helpful

Parts Used

  • Baseless Lamp

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerNelson from Weeverville NC

Repalced bulb.

The instructions from another customer was helpful. I concur with another comment I read while researching this proceedure. What Idio-- would design a microwave that required pulling the unit from the wall and removing the top panel just to access. It is good idea to unplug the transformer and capacitor wires before proceeding. I also googled a schematic to see the parts layout. Remember not to touch the bulb with your fingers. Use a cloth or paper towel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 11 people found this instruction helpful

Parts Used

  • Baseless Lamp

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set, Wrench(Adjustable)

CustomerRobert from LAGUNA VISTA TX

This is a small halogen light bulb for the microwave. This is the third time it has had to be replaced.

This is the third time that the bulb went out.It took two Sears service technitions to remove the entire appliance out of the cabinet. The entire top has to be removed and the insolation has to be pulled back to get to the electrical wire. I am waiting for an appointment to get Sears to do it again. The door springs have broken and you have to make sure the door is closed before walking away. It has a heavy glass and the weight is pretty heavy. Robert.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5