http://www.partselect.com/Schematics/GE/GE_Thumb/00125242i02.gif
See part 701 in the diagram

Lower Dishrack with Wheels

PartSelect Number PS3501353

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $134.04
  • You Save

    $22.34
  • Your Price

    $111.70
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 9 reviews What's this?
1-9 of 9
 

10 of 11 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Brentwood CA

Deteriorate lower rack

A no brainer. Simply open dishwasher door, remove lower rack and set new rack in place. Roll the new lower rack in dishwasher and close door. It fit perfectly and life routine was instantly on it's way without disruption.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 17 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerPatrick from San Jose CA

Upper and lower racks starting to rust

Removed the lower rack and upper rack after removing the end caps on the rail. Order new replacement end caps. The originals will likely break because the plastic becomes more brittle over time. Unsnap the upper washer arm from the original upper rack and snap onto the new one before inserting it into the rails.

The trick is replacing the end caps. Using needle-nose pliers, bend the indented edge of the rails out so you can attached the new end caps without trouble. After they are in place, use the tip of the needle-nose pliers to restore the indentation on the edge of the rails to lock the caps in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerErline from Glendale AZ

Rusted racks

Lower Rack- removed old rack and slid new rack in place.
Upper Rack- Removed the 2 plastic stops on rack slides using pliers to squeeze,turn slightly, & pull out carefully not to break them (although your company also carries those if I would have broken them). I then removed old upper rack, slid new upper rack in, pushed plastic stops back in rack slides and was finished

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJeff from Franklin TN

Rust and general wear

This was not a repair, But I wanted to comment on the excellence of service provided by Part Select.
Please accept my appreciation for the ease of ordering, the excellent website format and speed of shipping the products that I ordered.
Your staff clearly understands the excellence of service that so few companies provide today.
Thank you again for your commitment to service.
Jeff

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStanley from Lynn MA

Some of the ends of upper & lower rack were exposing rusting metal tips. White coating wear, expose metal, leading to rust.

Rolled bottom rack out and lifted out. Replace lower rack by simply setting new rack on rollers and push inside dishwaher.
Top rack required removing plastic end clips on both sides of upper rack arms. Little bit struggle to remove but once out, old upper slide out of arms.
Installed new upper rack on arms and push retaining clips back in. Job complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJose from Anthem AZ

New bottom dishwasher rack

it was super easy and the part came in days. it was super quick

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCarolyn from Novato CA

The problem was that the dishwasher lower sliding shelve was rusting out and coroding

We ordered a new lower shelve and slid it in on the rollers and it is secure and works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerRobert from Hillsborough NC

Put lower rack in

Took old rack out put new rack

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customeredward from noblesville IN

Lower rack was rusty

Took out the old one and put in the new one! Note the delivery time was great! The part was ordered one day and delivered the next! Thank You Ed Andrews

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-9 of 9