Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS3501353
This is a dishrack kit that includes the complete rack with wheels and also the silverware basket (not pictured).
This part works with the following brands: GE, Hotpoint & Kenmore.
A no brainer. Simply open dishwasher door, remove lower rack and set new rack in place. Roll the new lower rack in dishwasher and close door. It fit perfectly and life routine was instantly on it's way without disruption.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed the lower rack and upper rack after removing the end caps on the rail. Order new replacement end caps. The originals will likely break because the plastic becomes more brittle over time. Unsnap the upper washer arm from the original upper rack and snap onto the new one before inserting it into the rails.The trick is replacing the end caps. Using needle-nose pliers, bend the indented edge of the rails out so you can attached the new end caps without trouble. After they are in place, use the tip of the needle-nose pliers to restore the indentation on the edge of the rails to lock the caps in place.
Lower Rack- removed old rack and slid new rack in place. Upper Rack- Removed the 2 plastic stops on rack slides using pliers to squeeze,turn slightly, & pull out carefully not to break them (although your company also carries those if I would have broken them). I then removed old upper rack, slid new upper rack in, pushed plastic stops back in rack slides and was finished
Rolled bottom rack out and lifted out. Replace lower rack by simply setting new rack on rollers and push inside dishwaher.Top rack required removing plastic end clips on both sides of upper rack arms. Little bit struggle to remove but once out, old upper slide out of arms.Installed new upper rack on arms and push retaining clips back in. Job complete.
This was not a repair, But I wanted to comment on the excellence of service provided by Part Select.Please accept my appreciation for the ease of ordering, the excellent website format and speed of shipping the products that I ordered.Your staff clearly understands the excellence of service that so few companies provide today.Thank you again for your commitment to service.Jeff
it was super easy and the part came in days. it was super quick
We ordered a new lower shelve and slid it in on the rollers and it is secure and works fine.
Took old rack out put new rack
Took out the old one and put in the new one! Note the delivery time was great! The part was ordered one day and delivered the next! Thank You Ed Andrews
The rack for my model has been discontinued so they shipped me the replacement version. The wheels on the new one are skinnier than the original model so I had to remove them and replace them with the wheels from the old rack for it to fit/roll correctly. The new wheels were a little tricky to get off as I had to use a screw driver and basically manipulate/pry apart the clamps that hold them on. The old wheels just snap on.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.