BBB A-Plus
http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/TNH8RH95.gif
See part 17 in the diagram

Pump and Motor Assembly

PartSelect Number PS3500990

Manufacturer Part Number W10428773
Manufactured by Whirlpool

This part also comes with a self-cleaning filter.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock

  • Compare At

    $234.82

  • You Save

    $39.14

  • Your Price

    $195.68
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-1 of 1

 

7 of 9 people found this instruction helpful

Parts Used

    • Pump and Motor Assembly

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerMichael from Stuart FL

Poor wash quality and excessive noise

I inspected the pump and checked on-line for instructions . I removed the lower panel and the lower dish rack . Removed the washer head from the top of the pump inside the dishwasher . I next unplugged the wiring after disconnectiong the power supply . Next step was to remove the drain hose from the bottom of the pump . Put a towel under it because it's full of water . Unscrew the nipple from the bottom of the pump to allow clearance so it may be removed thru the top . There are four plastic ears that rotate on the base of the pump . Move them into the outboard position and lift the pump out thru the top. I applied some liquid detergent where the pump seal goes and pushed it back in . Installation is the reverse of removal .

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-1 of 1