Quick Question!

Have you ever purchased from PartSelect.com before?

3500892-1-S-Whirlpool-W10410997-Drive Motor - 115V
3500892-1-S-Whirlpool-W10410997-Drive Motor - 115V 3500892-2-S-Whirlpool-W10410997-Drive Motor - 115V 3500892-3-S-Whirlpool-W10410997-Drive Motor - 115V http://www.partselect.com/Schematics/Maytag/LD14-40.gif

Drive Motor - 115V

PartSelect Number PS3500892

This part has a D-shaped motor shaft and this motor runs at 1/4 horsepower and carries 4.5 amps.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Will not tumble.
  • Noisy.

Compare At

$167.53

You Save

$27.92

Your Price

$139.61
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.6 / 5.0, 17 reviews What's this?
16-17 of 17
 

1 of 2 people found this instruction helpful

Parts Used:
  • Drive Motor - 115V
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Noel from Chickasha, OK

Motor was locking up

Unplug the Dryer removed the 2 screws in the door and the two screws opposite the door and then you remove the front panel and then you remove the 6 screws that hold the front tub support and then rotate the tub support watching the wires out of your way. lift the tube out leaving the belt behind. Then remove the screws in the front of the blower and remove the clip on the blower shaft and the blower wheel should slide off of shaft. Then remove the wiring clip from the back of the motor by pressing the clips on each side and then lifting. Then remove the two spring clips that hold the motor down and remove motor. install new motor in reverse order and then install tube with the belt around the tub using it like a handle. then put the front support back on and reassemble the rest in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 6 people found this instruction helpful

Parts Used:
  • Drive Motor - 115V
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers
Customer: Moses from Fredericksburg, OH

Buzzing noise when pressed start button no power

make sure you unplug cord simply take dryer apart. waited 3-4 days on new parts due to christmas time. found you want to make sure the plastic sleves on motor are in the holding slots properly and take a good look at belt tension pulley before taking drum out or take a picture. did not need switch for start button motor only.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16-17 of 17