Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS3495236
This includes both sides. The dishrack glides back and forth on this track as it's mounted to the side of the tub.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I had to getto the side of the machine. After that, it was simply removing 4 screws and removing the old part, replacing the screws and putting the rack back in the track.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Replaced track on left side.
I removed the stops on both sides of the rack, and removed the rack. I then pulled the rail on the right side as far forward as possible, and then used needle nosed pliers to slightly bend upward the stop in the middle, allowing the bearings to clear and fully removed the track, leaving the housing in place. I then slid the replacement track into the housing, being sure that the bearing bracket cleared, and bent the stop back into place. I then repositioned the rack into the track and put the front stops back into place. Job finished!! My choice of terminology may not be accurate, but it worked, not once but twice. A few months ago, I had to do this with the left side.
Inspect and localize problem found misalignment of right track caused failure of rolling mechanism of left.Replacement of track. Able to remove old track by popping out of retaining fittings. Avoided pulling out to get access to fitting screws.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.