http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/I3UBBVVU.gif
See part 11 in the diagram

Manifold

PartSelect Number PS3492205

This part connects the spray arm to the main water tube. Also known as a water supply tube. Note: This part has been updated from the original.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Compare At

    $32.35
  • You Save

    $5.39
  • Your Price

    $26.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 11 reviews What's this?
1-11 of 11
 

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTimothy from Brandon MS

Upper spray arm mount broke which eventually caused the spray arm feed tube to break as well

Removed one screw which connects the upper spray arm mount, the spray arm feed tube, and the upper spray arm. Replaced with new parts ordered from partselect and it works as good as new. Highly endorse this website!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHope from Plainfield IL

Spray tube end broken.

unscrewed spray arm.
snapped off inlet holder.
snapped on new inlet holder.
screwed on new spray arm.
presto. it works.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Manifold

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRandall from Logan UT

Two piece water distribution tube kept falling off. Fell on to heating element and melted

Eay repair. Replacement tube was one piece and only required removing one phillip's head screw to replace

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerChristopher from Plantation FL

Washer arm at the bottom was flopping around causing the dishwasher to appear to leak.

Washer arm at the bottom was loose and flopping around and making waves when the bottom was full of water . This caused the dishwasher to appear to leak.
For the Washer Arm Bearing Ring, First I removed the bottom drawer. Then I unscrewed the retaining screw with my fingers. and lifted off the wash arm. I then removed and replaced the Wash Arm Bearing Ring which looks like a top hat with the top cut out. The rim of the " hat " on the one I removed had completely worn away and looked like a 3/4 inch cylinder It took a couple. of minutes to figure out which part I really had to replace. I then put back the wash arm and tightened the screw back, replaced the drawer and everythig worked perfectly.

For the Spray Arm Feed Tube, I first unscrewed the one screw holding the old tube in place. The old part was orginally in two parts. The new part is only one piece. I placed the new part in its place, and replaced the screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customertodd from woodstock IL

Broken upper wash arm stabalizer bracket...

very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDarren from Cincinnati OH

Spray arm feed tube and holder were damaged.

Unclipped broken holder from top rack. Removed one screw from feed tube and pulled tube off. Replaced with new parts that fit perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLinda from Hernando FL

Spray arm feed tube was completely shredded by a food processor blade

simply removed the old feed tube and the cracked holder, then replaced them with the new parts. machine works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • Manifold

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerJohn from Eagle NE

Feed tube worn out

First I ordered the wrong part as it was changed to a kit. reordered new parts and recieved them in less than 24 hrs. Took about 5 minutes to finish the job. Thannks to the young lady I talked to for helping me to order the right part and I have a hard time hearing and her southern draw msde it harder to understand but worked with me and we got things done!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Manifold

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMAX from Indianapolis IN

Dishes were not getting clean; thought we were going to have to replace our 12 year old dishwasher.

I removed one screw in the old spray arm and replaced the arm; then replaced the screw. My 'less than $10 part saved me the cost of a repair man. The dishwasher now operates as good as new. Max Briggs, Indianapolis

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Manifold

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKathleen from Cornwall NY

Broken spray arm feed tube

Unscrewed the broken one and just screwed the new one on.....really easy and now it works like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Manifold

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWilliam J from Wyandotte MI

Part came in contact with heat element and melted

Removed one philips head screw. Installed new part,reinserted screw.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-11 of 11