Quick Question!

Have you ever purchased from PartSelect.com before?

3491492-1-S-GE-WB27T11313-Electronic Control Board
3491492-1-S-GE-WB27T11313-Electronic Control Board 3491492-2-S-GE-WB27T11313-Electronic Control Board http://www.partselect.com/Schematics/GE/00115051i01.gif

Electronic Control Board

PartSelect Number PS3491492

NOTE: This part has been updated by the manufacturer. With this control the wiring could be different from the original. It will possibly need to be installed by an appliance repair person.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Touchpad does not respond.

Compare At

$102.04

You Save

$17.01

Your Price

$85.03
Order within the next 1 hr and 49 mins and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 2 reviews What's this?
1-2 of 2
 

22 of 30 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Gary from Wichita, KS

Yje electronic control panel was shorted out. I orderd a new one and in a timely mannor your service delivered the part via fed ex.

The repair was simple. All wires were color coded and the new part had the same color codes marked. Simply unplugged the wires from the bad part and plugged them into the new part a reinstalled the part to the back panel of the range.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Ken from CALABASH, NC

Blew out board by crossing wires..mistakenly toke out bulb assembly to replace bad bulb

Turne off power to range..pulled oven out..Took top back panel off with nut driver. 4screws .. Took picture of control board....removed bad control board with Phillips driver...4 screws....installed New board...removed 1 connection at a time and replaced in New board..Turned power on to test new board...check picture to make sure connections are correct...turn off power...put back panel back on...put range back in place...turn power back o n...done ..approximate time 15 to 20 minutes..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2