Quick Question!

Have you ever purchased from PartSelect.com before?

3487734-1-S-GE-WR02X13425-Door Stop - Black
3487734-1-S-GE-WR02X13425-Door Stop - Black 3487734-2-S-GE-WR02X13425-Door Stop - Black http://www.partselect.com/Schematics/GE/00124199i04.gif

Door Stop - Black

PartSelect Number PS3487734

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door won’t open or close.

Compare At

$8.46

You Save

$1.41

Your Price

$7.05
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 3 reviews What's this?
1-3 of 3
 

17 of 24 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: David from Cary, NC

Fridge door would not close "automagically"

I had to remove the fridge door (side by side), which took approximately 10min (most of which was retrieving the right size socket wrench from the garage). With the door removed, I could replace the broken door closing cam and door stop... with 4 screws. Not much to it. Had the door mounted back on in another 5min and that was it. :)

Help other customers find the most helpful instructions.

Were these instructions helpful?   

14 of 25 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Wrench set
Customer: Mark from Frederick, MD

Dorr stop was broken when door was allowed to swing too hard.

I removed the two screws which released the door stop. I then put the new door stop in place and installed the two screws. Job Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
  • Door Stop - Black
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: M from STERLING HEIGHTS, MI

My door stop broke

I had to remove 2 screws to get the broken door stop off then I put the new door stop on by using the 2 same screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-3 of 3