http://www.partselect.com/Schematics/GE/GE_Thumb/00124321i02.gif
See part 701 in the diagram

Lower Dishrack with Wheels

PartSelect Number PS3486947

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Compare At

    $104.78
  • You Save

    $17.46
  • Your Price

    $87.32
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 20 reviews What's this?
1-15 of 20
 

88 of 157 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customercharles from canton MA

Roller on upper rack broken - lower rack plate holders broken

lower rack took one min. take out old slide in new

upper rack a little tricky had to remove end caps on rack arms to slide rack out to replace rollers. end caps are not snapped in they have a lever in the track that is part of the cap if you twist it a little cap will slide off.
total time for this part 15 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?

43 of 47 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:More than 2 hours

Tools

Customermichael from Bloomington IN

Lower dishrack rusted

replaced rack, no repairs required

Help other customers find the most helpful instructions.

Were these instructions helpful?

29 of 30 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Salinas CA

Racks had rusted and needed replacement

The bottom rack was a breeze since it wasn't attached to anything. The more difficult task was removing the plastic rail guard for the top rack. With some elbow grease and ingenuity, I finally figured out that it must be tilted prior to being popped out of its socket. Follow the same procedure after replacing the rack.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerHarold from The Colony TX

Racks had rusted but dishwasher still worked perfectly

bottom rack was easy as just pull out and replace. Upper rack had to move front part of the brackets to pull out rack which did require some figuring out but I did finally get it and once I figured out one side the other was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 11 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJohn C from Indianapolis IN

Dishwasher rack was rusting and partially broken

The repair only required me to lift out the old unit and set the new rack into the dishwasher. I was pleased that there was nothing to put together. The rollers were already attached.
It took longer to open the shipping box than to do the installation.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEverett (Jeff) from Altus OK

Rusted out racks

Followed the instructions and it was easy. Made the washer seem brand new!...It is the best solutions for a small budget. We used CLR to wash out the washer workings and it really left a sparkle on the dishes... I am so glad you don't change the models so much that parts can't be exchanged when they wear...

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:15 - 30 mins

Tools

CustomerRaymond from Rochester NY

Replacement of the dish racks due to corrosion

The top dish rack was not an exact replacement, the side shelf did not fit and the center spray did not fit. I ran into much more trouble removing the the top rack than I had thought. I used the old wheels and it finally went on but the other mentioned problems remained.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerOria from Scottsdale AZ

Rust

Just took the old rusty rack out and put the new one in its place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNelson from Oroville CA

Disrack was getting rusty

Removed old rack replaced with new one which was an exact duplicate. Mama's happy; everybody's happy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerElaine from Oceanside CA

Rusted/corroded lower dishwasher basket

removed old drawer-like basket, installed the new duplicate replacement part. Easiest "repair" I've ever done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • Lower Dishrack with Wheels

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCatherine from South Hadley MA

Lower dishrack getting rusty in spots

Just lift out the old dishrack and put in the new. Very easy and straightforward. Easy to order, unit came assembled. Happy customer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMARK from CAPE CORAL FL

Rusted dishracks

very simple pull out the old and push in the new

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerEduardo J from San Angelo TX

Rusted racks

Replaced lower rack with new. Upper rack removed front stoppers, removed old rack, slit new rack in and replaced stoppers. Total time about 15 mins.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAngela from Novi MI

Dish racks were rusted

The installation was very easy. I didn't need any tools. Just unsnap the holders that keep the wheels in place on the rails (I'm referring to the upper rack, as the lower rack just sits at the bottom and rolls in and out), take the old one out, slide the new one in, and snap the holders back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerVirginia from Pawleys Island SC

The center rail in the crisper section broke and the hinge cover was stolen and eaten by my dog.

The parts I ordered were for a Maytag refrigerator and a GE dishwasher. The broken rail in the crisper section of the 'fridge was a simple insertion, and the hinge cover at the corner of the freezer drawer just popped on--the doggy has a new home! The dishwasher "repair" was a simple removing of the old lower rack and the sliding in of the new one. Couldn't be simpler. The parts arrived quickly and you have a happy customer!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 20