Quick Question!

Have you ever purchased from PartSelect.com before?

3486910-1-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4
3486910-1-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 3486910-2-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 3486910-3-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 http://www.partselect.com/Schematics/GE/00124321i02.gif

Upper Roller and Axle - Kit of 4

PartSelect Number PS3486910

The dishwasher roller assembly attaches to the dishrack located in the upper level of the dishwasher. It allows the dishrack to slide and roll easily. If the upper rack keeps falling off the track in dishwasher, the door will not close, the door makes noises, and/ or dishes are not cleaning properly, then it is best to replace it for more security. A flat-blade screwdriver is the only tool needed for this installation. Slide open the upper dishwasher rack and remove retaining tab from both ends of the rack and slide it out. Locate the older roll assembly, remove it, and replace the rollers. Remember to put back the tabs on each side before sliding it back in. Make sure the dishwasher is off before starting this installation project.

This part works with the following brands: GE, Hotpoint & KENMORE®.

This part fixes the following symptoms:

  • Door won’t close.
  • Not cleaning dishes properly.
  • Noisy.
  • Door latch failure.

Compare At

$13.88

You Save

$2.31

Your Price

$11.57
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 139 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Frank from Hampton, VA

Roller was broken and upper rack fell from rails

I purchased a roller for $10 and ended up with a bag of four. Good think I did not buy extras or I could have ended up with 8 or 12 rollers of which I needed only 1. It was not clear from you product description that I got for pieces. I pulled off broken roller (it crumbbled into several pieces actually) then snapped new roller into place. Had to remove and return end cap of rail to get new roller into rail. I was very worried the end cap would crack during this operation, but it held together. Lots of bending required. I recommend getting new end caps when replacing the rollers.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Glenn G from Suwanee, GA

Upper rollers and axles broke apart

Used needle nose pliers to pop end caps off and remove broken axles. Popped new rollers and axles on rack. Then replaced end caps. Less than 15 min. Easy fix and saved the expense of service call.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: Felix A from Orlando, FL

Tray will not roll.

New wheels were inserted in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Rodney from Denton, TX

Rack roller replacement

As they say, anything is easy if you know what you are doing. I had no clue. I located the model number on the left inside doorframe and went to the internet. After visiting PartSelect I quickly found the part that I needed and then saw that there is an installation video. I watched it, ordered the part, it arrived earlier than I ever figured, and installed two new rollers. It was very easy. The only glitch is that I thought that I was ordering two single rollers when in fact there are 4 included in each roller order (4 per bag). Even after that mistake, I am more than pleased.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Marilyn from Deerfield Beach, FL

The roller on top rack broke

I had called a repair man twice for electrical repairs and asked him also to fix the roller. He said he'd order the part for me, but would charge me and additional $35 to come back and put it on.

It was so easy to order the part by myself online that I decided to do it myself. When the part came, I thought it would be super easy, but I forgot how to get the end cap off. After about 3 minutes, I twisted the cap and it came off. The rest was easy...just slip the new roller in and replace the endcap. No tools, just patience.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Rick from Clinton Township, MI

Rollers were worn out on the upper rack roller

I just watched the video on your web site and then followed you directions. It worked like a charm the first time.

This is one incredible site. Thank you for being there!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: ALAN from ALEXANDRIA, VA

Rollers broke

Followed the instructions - starightforward

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: William from Hales Location, NH

Top rack rollers broke off

Used screwdriver to pry off old end caps, then slid the rop rack out and replaced the broken rollers with the new rollers. Put the top rack back into dishwasher on its rails and put new end caps on ends of the rails. Job finished! Total time 10 minutes. Easiest repair I've ever had to do!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: WILLIAM from COLLEYVILLE, TX

Top rack roller was broken

Watched a video on how to change part. Ordered the part and PartSelect shipped it quickly. Got the part installed four new rollers within five minutes. Old parts were brittle and cracked. Easiest repair I have done on an appliance!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: William from Fairfax, VA

Broken upper rack roller

I removed the clips from the ends of the roller guides and removed the upper rack. I used a screw driver to remove the clips. I then used the screw driver to remove the clip on broken roller from the rack. I was able to snap the replacement roller back into place without a tool. I the slide the upper rack into the guides and replaced the clips on the end of the guides. I used a screw driver to help me push the clips back in.

Your video helped me understand the process and have confidence in my ability to replace the broken rack wheel.

Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Frank from Playa del Rey, CA

Upper basket rollers and support were broken/worn out

I pried out the roller channel end cap then removed entire basket. The four rollers were installed and snapped back into place. The roller channel end caps were then replaced and the basket is just like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Nicholas from Navarre, FL

Broken rollers on top rack

parts fit right and job went smoothly

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Frank from Pennsburg, PA

Broken top rack rollers.

I ordered the parts, watched the how-to video to see how to remove the wheel stoppers without breaking them, received the parts, took about 2-1/2 minutes to replace all 4 rollers. Quick, painles, and cheap. Thanks for your great service.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jon from Depoe Bay, OR

Rack roller broke and the rack sagged

Last time I had to replace a rack roller, I broke the end cap trying to get it out. This time I watched the repair video at Part Select, followed the instructions, and voila. Used a screwdriver to bend the tab on the end cap and took it our at an angle, removed the other end cap, rolled the rack out, unclipped the roller, clipped the new one on, replaced the rack and installed the new end caps with a push in design. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Denny from Greentown, IN

Broken front rack roller

I watched the video before starting and it made the repair very easy. Only one roller was broken but since the others were over 10 years old I replaced all 4 rollers. Took less than 10 minutes to replace all 4.

Help other customers find the most helpful instructions.

Were these instructions helpful?