3486910-1-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4
3486910-1-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 3486910-2-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 3486910-3-S-GE-WD12X10327-Upper Roller and Axle - Kit of 4 http://www.partselect.com/Schematics/GE/00124321i02.gif

Upper Roller and Axle - Kit of 4

PartSelect Number PS3486910

This is a kit if 4.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door won’t close.
  • Not cleaning dishes properly.
  • Noisy.
  • Door latch failure.
  • Compare At

    $13.40
  • You Save

    $2.23
  • Your Price

    $11.17
In Stock
Order within the next 1 hr and 17 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 133 reviews What's this?
1-5 of 133
 

496 of 502 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Carl from Fairfield, TX

The rollers on the upper rack broke

There are eight guides that hold the rack rails in place. Use a Phillips screwdriver to remove the top two guides on each side in order to remove the rack from the dishwasher. The plastic axles on the rack and the rollers snap on. Use the hammer and punch to bend the metal clip on one end of the rail. Remove the plastic end piece then slide the rollers out. Place two new rollers in the rail and put the plastic end piece on. Use the hammer and punch to bend the metal clip back into place. Snap the rails on the rack and set the rack on the guides in the dishwasher. Replace the top guide using the screwdriver, you will have to twist the rails in order get them in between the
guides.

Help other customers find the most helpful instructions.

Were these instructions helpful?

380 of 383 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Doug from Columbus, OH

Broken upper rack roller, rack kept falling off the track

Used the pliers to remove the broken roller. It came off in pieces. Slid new one on.

Cap on end of roller track was a bit of a challenge. It sort of twists & pulls off.

Help other customers find the most helpful instructions.

Were these instructions helpful?

201 of 269 people found this instruction helpful

Parts Used:
  • Upper Roller and Axle - Kit of 4
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Eric from Centreville, VA

Rack falling off of upper slides

1. I removed the plastic stops from the ends of the upper rack slides.
2. Removed the upper rack.
3. Unclipped the old rollers from the rack.
4. Clipped the new rollers onto the rack.
5. Made a grunting noise so the wife could hear.
6. Walked away

Help other customers find the most helpful instructions.

Were these instructions helpful?

219 of 409 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: michael from perry hall, MD

Wheel replacement

Pulled the end cap off and replaced the wheel.
most of the parts were for future repairs

Help other customers find the most helpful instructions.

Were these instructions helpful?

67 of 69 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: JOHN from PURCELLVILLE, VA

Wheels were worn out and kept falling off

popped old wheel off popped new one on
for the rack roller i took the ends off and slid old rollers off then slid new ones on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 133