3486627-1-S-GE-WB27K10355-Gas Oven Electronic Control/Clock
3486627-1-S-GE-WB27K10355-Gas Oven Electronic Control/Clock 3486627-2-S-GE-WB27K10355-Gas Oven Electronic Control/Clock http://www.partselect.com/Schematics/GE/GE_Thumb/00115117i02.gif

Gas Oven Electronic Control/Clock

PartSelect Number PS3486627

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Touchpad does not respond.
  • Will Not Start.
  • Little to no heat when baking.
  • Will not program.
  • Compare At

    $85.67
  • You Save

    $14.28
  • Your Price

    $71.39
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 8 reviews What's this?
1-5 of 8
 

16 of 19 people found this instruction helpful

Parts Used

  • Gas Oven Electronic Control/Clock

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerTimothy from Forney, TX

A lightining strike fried the circuit board

A G.E. tech came out and quoted $500 to replace the circuit board. I unbolted the board myself and used the camera in my phone to take a picture of the wiring. Then I came to PartSelect.com and using their diagrams found the replacement board for $75. It came in the mail a few days later. I used to picture in my phone to reconnect all the wires, bolted everything back up and baked some cookies. Thanks PartSelect for making my repair job simple and inexpensive.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 6 people found this instruction helpful

Parts Used

  • Gas Oven Electronic Control/Clock

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerSharon from Beverly, NJ

Electric storm fried oven display

I ordered a new display from the internet. I removed the panel where the display is housed, unscrewed the entire display assembly and unplugged all wires connecting it. (I made a drawing and noted colors of wires) I removed adhesive face of display and replaced it on the new display. I then screwed in the display and reconnected the wires as per my notes. I reassembled the panel and applied power and it worked like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

  • Gas Oven Electronic Control/Clock

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerEric from Fort Walton Beach, FL

The display went blank

First I removed the back panel and then removed the four screws that hold the display board in place.I then disconnected the wires.
I installed the new board and connected the wires.
I put the back panel on.
I installed a serge protector and pluged in the range. Job completed and it worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerBrian from Taylorsville, IN

Clock wouldn't keep time

Removed the top back cover. Then removed screw for clock circuit board. swapped wires from old circuit board to new circuit board. reinstalled screws. Then replaced top back cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Gas Oven Electronic Control/Clock

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

CustomerRichard from West Point, MS

Wouldn't hold oven tempature

First I tested oven sensor which checked o k. I then made a diagram of the electrical wireing to the oven control. I disconnected wireing and removed the control then with sharp knife I removed touch control pad. I placed th touch pad on the new panel and installed panel and connected wiring. Pluged into wall rec and test oven which checked o k .

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 8