BBB A-Plus
348478-1-M-Whirlpool-358237-Agitator-Bolt.jpg
348478-1-S-Whirlpool-358237-Agitator-Bolt.jpg 348478-2-S-Whirlpool-358237-Agitator-Bolt.jpg 348478-3-S-Whirlpool-358237-Agitator-Bolt.jpg

Agitator Bolt

PartSelect Number PS348478

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate
  • Unusual Noise
  • Pumps but will not spin
  • Shakes and moves
  • Leaking water
In Stock

  • Compare At

    $5.35

  • You Save

    $.89

  • Your Price

    $4.46
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 46-47 of 47

 

25 of 700 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRaymond from Speedwell TN

Cam dogs worn out and the agitator wouldn't rotate.

Removed softner dispenser on top of agitator. Removed next was cap and seal cover at base of the agitator by just pulling it up. Used 1/4" drive w/ 7/16" socket w/long extension to remove the agitator mounting bolt. While holding the bottom of the auger, pull the agitator up, removing the top agitator assembly. Replace the necessary worn parts. Read the directions which came with your ordered parts. Also, the agitator grease which you are to use to lube the top of the Thrust washer is not included in the repair kit. You can use non water soluable grease to lube the thrust washer or order part number 350849. Total time, 15 minutes. Happy washing...

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 699 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsSocket set

Customerpeggy from johnston RI

Agitator top not working

Repair was very easy for me and I have three fingers missing on one of my hands. Video on repair was also very detailed. I ordered three extra parts that were already included in the agitator kit. Would have been nice if all parts were listed that came in the kit and add a small tube of the grease. Delivery time was great! I would order from this company again, I was very pleased. I have already referred a friend to the site for her repairs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 46-47 of 47