348478-1-S-Whirlpool-358237            -Agitator Bolt
348478-1-S-Whirlpool-358237            -Agitator Bolt 348478-2-S-Whirlpool-358237            -Agitator Bolt 348478-3-S-Whirlpool-358237            -Agitator Bolt http://www.partselect.com/Schematics/Maytag/TEBJZIYW.gif

Agitator Bolt

PartSelect Number PS348478

Manufacturer Part Number 358237
Manufactured by Whirlpool

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not agitate.
  • Noisy.
  • Pumps but will not spin.
  • Shakes and moves.
  • Leaking.
  • Spins slowly.
  • Compare At

    $5.34
  • You Save

    $.89
  • Your Price

    $4.45
On Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 48 reviews What's this?
 

1 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: William from Vallejo, CA

Would not agitate

With the repair kit and socket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Kenneth from Brockton, MA

Top agitator stopped working

simply remove the cap, reach in and pull out the cover,use a 7/16 socket with a long extension,undo the bolt, remove the agitator,turn it upside down and the piece with the 3 dawgs in it will fall out, just replace them with the new dawgs, slide the retaining cover back on untill it snaps into place, then drop it back into the agitator and reverse the removal process and your done, real easy! This is the second time within 10 years I had to replace them, They are only plastic and wear out within 5 or 6 years!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Socket set, Wrench set
Customer: Valerie from Bridgeport, CT

Agitator was not working properly

Followed the instructions in the video and everything was easy to remove and replaced the parts and reassembled the agitator. The washing machine is working great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: WILLIAM from MILFORD, NJ

Agitator not turning

Bought the agitatop repair kit and bolt, followed the instuctions as well as the video, piece of cake took 15 mins

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set, Wrench (Adjustable)
Customer: Nathanael from Halethorpe, MD

Agitator was slipping, not agitating

The fabric softener dispenser pulled right off, then I tugged out the plastic cam cover (which was obviously not as waterproof as intended). The bolt was very rusty. I had to use the socket on the end of the screwdrive handle attachment for lack of a full one foot long 1/4 inch drive extender. Then i had to turn that with an adjustable wrench for leverage. It slipped a couple times but then came off. To disassemble the two halves of the agitator i had to pry on the rather squished tabs holding them together and yank quite hard until it popped off. Then it came apart easily, the cam went back in easily, especially with the provided instructions, and then it all popped back together after a well needed cleaning. The new bolt went right in the cover back on. After a empty load of water to rinse away any remnants it works like a charm.

Help other customers find the most helpful instructions.

Were these instructions helpful?