347661-1-S-Whirlpool-349639            -Lint Filter
347661-1-S-Whirlpool-349639            -Lint Filter 347661-2-S-Whirlpool-349639            -Lint Filter

Lint Filter

PartSelect Number PS347661

This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Compare At

    $39.54
  • You Save

    $6.59
  • Your Price

    $32.95
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
1-15 of 26
 

34 of 37 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customergregg from castaic CA

Worn out lint filter

The new lint filter fits perfectly,however because the handle is much larger than the original it does not allow the filter to close completely...causing a small amount of lint to acummulate on the dryer top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

18 of 18 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerWillard from Saxonburg PA

Dryer vent screen seperated from frame

simply replace vent filter

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 21 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerChris from Worcester MA

Motor tried, but could not turn drum

First, I unplugged it and pulled it away from the wall. Then I pryed the front of the top up. It is scary to apply that much force, but the clips did not break. It opens like a car hood. Then I removed the two sheet metal screws that hold the front to the sides. Don't forget to unplug and unclip the door switch wires. Then I lifted the front off the bottom clips. Be sure to hold the drum up when you do this. Three hands will make it easier. Then remove the drum and belt. The belt tensioner will fall off, but that is ok.

I thought the problem would turn out to be the motor, but instead it was the front seal for the drum. It is felt and had broken. It folded under itself and was jamming the drum to the point that the motor couldn't turn it.

I replaced the felt seal, which attaches to the front cover with three clips and also replaced the plastic guides, which clip to the drum. Both were easy to do. I had replaced the rear drum seal a few years ago and so it was ok, otherwise I would recommend doing that too.

While I had it apart, I opened up the back and cleaned out all the lint in the fan housing. I had replaced the heater element, thermal switch and fuse a few years ago, so they were fine.

I also replaced the mosture sensor, just because it only cost $11. I bought a new lint filter, because it had holes in it after 20 years. I replaced the belt, because it was only $10. I replaced the lint filter cover and front door handle, because they had yellowed. I will warn you about the front door handle. It was a bear. I finally had to take the door apart to get the little plastic clip to seat correctly.

Then I put it all back together, which again is easier with 3 hands. Holding up the drum and putting the front cover on the lower clips can be a bit tricky alone. Also, be sure to rotate the drum to make sure the rear seal is not folded under and the front seal is seated correclty.

I fired it up and it ran great, except for the constant whistling. I had wondered what the little clear plastic box in the back did. Turns out it is the lint filter is full whistle warning thing. I took the back off again and found a wire was resting on the flapper door of the box and holding it in the wrong postion. By the way, it is a really irritating sound after the first few minutes. I moved the wire and it works great.

I worked slowly and it went well and was not hard.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMary Ann from Farmingdale NY

My lint filter was torn and had ragged edges

My husband pulled out the old filter and quickly installed the new one. It fit perfectly.

I'm so glad I was able to order the part. The machine looks like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNeil from Kent WA

Lint screen torn & broken access door

The new lint screen fit just fine. The new access door popped on with a little help from a screwdriver.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAlbert from Burlington MA

Lint filter screen torn and rusted

Pulled to old out inserted the new. I would like to say your turn around from date part was ordered until I recieved it was three days, I find that amazing. I'm still waiting for a part I ordered from another company 1 month ago. The price was right shipping cost was very reasonable and your web site extremly easy to use. Thanks very much, Al

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Rancho Santa Margarita CA

Screen on lint filter was worn

Pulled out old filter...pushed in new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCHARLES from NEWPORT NC

The lint screen was torn.

FIT GREAT,WELL PLEASE WITH ORDER!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerjohn from carrollton TX

1 full washer load of towels tooks 4 hours or more to dry.

I pulled the dryer out,unplugged it,layed it on it's face,& removed the screws from the back panel.The heating element was at the bottom,unplugged the element ,remove screws (2) & removed the heat element.I spliced the new element in with parts supplied & put it back togather.This dryer is 23 years old ,I have replaced belt ,Idler,& rollers a few years back (from your company).It was top of the line when we purchased & I knew it used to dry clothes a lot quicker.The parts were here in 2 days & the repair worked great.I was looking at 500-700.00 for a new dryer & repaired this one for 73.00.My wife & I could not be happier,Thank You Parts Select for everything !!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerDonato from West Chicago IL

Problem turn out to be the 2 coils at the gas valve.

opened top panel, unscrewed 2 screws to release front panel. removed 2 screws that held coils and replaced.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 12 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerEric from Spring TX

Clothes getting torn

Removed the drum from the machine. This involved taking the dryer almost completely apart. However, it wasn't that difficult. The hardest thing was remembering where everything went to put it back together. So far so good. Replaced the read drum seal as this was the most likely cause of the problem. The rollers were replaced too since that was a possible cause and the machine would be apart anyway.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGary from Ketchum ID

The item was an exact duplicate.

I swaped out the old for the new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerCharles from Chula Vista CA

Ripped lint filter

Simply removed old filter, cleaned the lint area and inerted the new filter. Perfect fit, and no hassle. 4-5 minutes and just like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerREGINALD from MATTAPAN MA

Lint filter

Change the lint filter......

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDorris from Casselberry FL

Lint filter not catching lint

put in new lint filter

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-15 of 26