347661-1-S-Whirlpool-349639            -Lint Filter
347661-1-S-Whirlpool-349639            -Lint Filter 347661-2-S-Whirlpool-349639            -Lint Filter http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/QI6ZUVE2.gif

Lint Filter

PartSelect Number PS347661

This dryer lint screen comes with a handle. This filter collects lint as it passes through the dryer vent.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Compare At

    $33.00
  • You Save

    $5.50
  • Your Price

    $27.50
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 26 reviews What's this?
 

4 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNeil from Kent, WA

Lint screen torn & broken access door

The new lint screen fit just fine. The new access door popped on with a little help from a screwdriver.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerPhillip from Pekin, IL

Dryer stop working after I moved the timer setting while dryer was running. So I replaced the thermal fuse while I had the dryer away from the wall, plus the lint filter was torn.

The repair was easy, what took the longest was cleaning the lint from the inside of the dryer and the housing that holds the lint filter. The inside of our dryer is now as free of lint as the day we bought it.To make the repairs I pulled the dryer away from the wall and removed the vent hose and unplugged the dryer from the outlet.I then removed the screws from the back panel so I could replace the thermal fuse. I did this by removing one screw from the thermal fuse and pulled it free from the dryer.I then installed the new thermal fuse and screwed it to the dryer.Then I removed one wire at a time and installed them to the new thermal fuse.I then screwed the back panel to the dryer.Next I removed the screws and panel behind the control panel of the dryer so I could replace the timer.Once I could see the timer I compared my timer to the new one before doing anything else.Then I removed control knob from front of timer.Removed the screws holding old timer in place.Installed new timer to dryer with same screws and installed control knob to timer.Then I removed one wire at time from old timer and installed to new one, I did this until all wires had been connected.Then I installed the panel to the back of the control panel with the same screws.Installed new vent hose to back of dryer and plugged cord back into the outlet. Pushed dryer back into place.Remove old torn lint filter and replaced it with the new one.Wife then tried dryer out and it worked. Dryers been working just fine ever since.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Rancho Santa Margarita, CA

Screen on lint filter was worn

Pulled out old filter...pushed in new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Lint Filter

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerCHARLES from NEWPORT, NC

The lint screen was torn.

Fit great,well please with order!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customerjohn from carrollton, TX

1 full washer load of towels tooks 4 hours or more to dry.

I pulled the dryer out,unplugged it,layed it on it's face,& removed the screws from the back panel.The heating element was at the bottom,unplugged the element ,remove screws (2) & removed the heat element.I spliced the new element in with parts supplied & put it back togather.This dryer is 23 years old ,I have replaced belt ,Idler,& rollers a few years back (from your company).It was top of the line when we purchased & I knew it used to dry clothes a lot quicker.The parts were here in 2 days & the repair worked great.I was looking at 500-700.00 for a new dryer & repaired this one for 73.00.My wife & I could not be happier,Thank You Parts Select for everything !!

Help other customers find the most helpful instructions.

Were these instructions helpful?