347627-1-S-Whirlpool-349241T           -Drum Support Rollers
347627-1-S-Whirlpool-349241T           -Drum Support Rollers

Drum Support Rollers

PartSelect Number PS347627

These two drum support rollers are no longer available for individual sale. Available in a package of two and it is recommended that you replace both rollers at once. These two rollers come with four tri-rings and one palnut.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Will not tumble.
  • Will Not Start.
  • Compare At

    $18.42
  • You Save

    $3.07
  • Your Price

    $15.35
In Stock
Order within the next 1 hr and 5 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Maintenance Kit

Part Number 373087

NOTE: This kit is for 29" wide dryers built 1965 or later. Please verify model # before ordering as may not work for all models. This kit comes with one multi-rib belt, two drum support rollers, one idler pulley, four tri-rings, and one clip. This part can be used with both gas and electric dryers.

Order within the next 1 hr and 5 mins and your part ships today!
$33.43
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 83 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

Customerbenny from yuba city CA

Rumbling noise inside dryer

first removed 2 screws under lint screen door ,then popped up top of dryer (lid),removed 2 screws holding front cover of dryer on,removed front cover,after removing 2 wires from door switch,then took belt off of drum by releasing tensioner,removed drum to access drum rollers,removed old rollers & installed new rollers,and reassembled by reversing this procedure

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerEthan from Manchester CT

Loud noises when dryer was spinning.

I started trying to locate the noise. I started to remove screws in the rear plate. Removed the rear plate. Couldn't find the noise. Had to remove the top cover and operational controls. Couldn't locate the noise. I figured it was a bearing that went bad somewhere, but I coulnt find it. During the search for these drum rollers I was able to thouroughly clean out old debris and lint caught in the machine for years. Finally I located the bottom front cover, took it off, and located the problem.

At this point I went online, located the part with these guys, ordered it and got it delivered in like 2 days. Pretty quick.

I then went back and replaced the both drum rollers in like 1 hour.

Dryer works and sounds great now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerHarold from Coyle OK

Made a lot of noise

Took of the old roller and replaced it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerJudah from Lompoc CA

Dryer was making a really loud noise

Opened up the front of the dryer. Saw that the belt was partially torn. Also noticed that the wheels weren't very smooth. So went online, found this website, measured the belt described with the one in the dryer after I took it out. Also replaced the drum rollers because they were worn down. Received the parts in 3 days. Immediately replaced the parts and sounds like new. No noise and works great! I'm happy and so is the family. Thank You! Why pay more for replacement parts at Sears.com or otherside when you can get them cheap here!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRobert from Williamston NC

Worn drum rollers causing loud noise and cracked drum belt.

Unplug Dryer or turn off power to dryer at breaker box.

Remove lint filter.

Remove two screws at front of lent filter from top of dryer.

Pry up top at front corners to seperate top from front of dryer.

Lift front of dryer top and push backward. The top is hinged at rear and should be supported against a wall or step ladder after it passes vertical.

Remove two screws from top side of front panel holding front panel to each side.

Unplug wires from door switch.

Lift front panel up until it comes off retaining clips on each side panel. Set front panel aside.

Place block or other suitable object under front of drum to hold it up.

Locate idler pulley and motor under dryer drum.
With left hand push idler pulley up and toward motor to slacken drum belt. With right hand remove belt from motor pulley.

Lift and remove drum from dryer.

Vacuum lint and dust from inside dryer.

Remove triangular shaped retainer clips at the front of drum roller shaft.

Remove worn drum rollers.

If worn, remove triangular shaped clips from rear of drum roller axel.

Place new triangular clips on roller shaft. With screw driver force clips clear of groves at front of shaft. Slide clips on axel until they snap into groves in rear of shaft.

Slide new rollers on shaft.

Secure rollers with new triangular clips on front of roller shaft.

Remove old drum belt and replace with new belt. The belt was not broken on my dryer but it was old and cracked. I didn't want to replace the rollers and have the old belt break.

Place drum back into dryer. Make sure rollers are properly seated in grove on dryer drum and that seal on rear of drum is over the flange in the firewall.

Prop up front of drum.

Thread new belt between idler pulley and pulley frame. With left hand push idler pulley up and toward motor to give slack to drum belt. With right hand place new belt onto motor pulley.

Remove drum prop and place front panel into drum.

Lift front panel and drum a few inches to align with retainer clips at the bottom of each side panel.

Replace screws at top of front panel.

Attach wires to door switch.

Lower top and push down into clips

Replace screws in lint filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Tarpon Springs FL

Thumping noise when drying

I removed the 2 screws under the lint cover and popped the top of the dryer up and back. I then unplugged the safety switch wire on the upper right of the front cover. Next I removed the 2 screws holding the front panel on and popped it off while supporting the drum. I took the drum out after taking the belt off it. One of the rollers had the rubber stripped off it. This was kind of curious since I put in a full kit including belt and rollers a few months ago. I replaced the damaged roller and reassembled. I will save the second roller in case it happens again. There is no apparent damage to the drum so I have no idea why the previous roller didnt last.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerJoseph from Port Jefferson Station NY

Loud noise from dryer - rollers gone bad

The part came quicker than expected. The repair was relatively simple, thanks to all the posts on this site. I was able to get to the rear rollers without having to remove the drum entirely. This helped. Overall, the repair was inexpensive and not very time consuming. Plus it gave me a chance to clean out the inside of the dryer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Wrench set

CustomerGayle from Mars Hill NC

Loud noises when running

Completly gutted every part of the machine, to put in the drum support rollers. Really wasn't that difficult. But you will need 2 people. One needs to hold the drum while one replaces the drum roller.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerDillard C. from Vina AL

Drum roller became lose and seperated from the shaft that supports it. It had to be replaced

remove the front panel, belt [notice the way the belt is fasten] remove the tub, support bracket to the drum roller, and slide the new drum roller on and place the tre ring in the slot. then re-install everything in reverse

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLarry D. from Kidder MO

This was very easy

took the drum out and replaced the wheels there was nothing to it

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerStephen from San Bruno CA

Loud sqeeking noise while running

Removed the two screws holding the top. Popped the top. Removed the door wires. Removed 2 screws at the top of the front panel. And removed 2 screws from the bottom of the front panel. Pulled the front forward dropping the drum. Relaeased the tension of the belt pulley. Pulled the drum straight out. Removed the right roller. It was worn out. Placed the retaining clips inner and outer. Lubricated both drum supports with lithium grease. Replaced the new belt with the belt tensioner. Reassembled drum, front panel and top. Dryer runs like a Top now. Careful of the sheet metal edges very sharp.....

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerRichard from Williston FL

Dryer squealed as it rotated.

Take out the two screws the hold the lint screen filter compartment in place. Remove the two top clip retaining screws, and lift the top LOOSE and turn it a bit out of the way. I didn't find it necessary to remove the top. Unclip the two wire electrical connector at the top - front, and remove the 1/4 " screws the secure the front. Lift the front up and out of the way. Slide the drum belt off the tensioner and moter pulley and slide the drum out the front. Remove and install the rollers ( and its just that quick) and while your in there. Clean up a bit ... cant hurt right? Especially on and around the motor. Reverse the procedure but rotate the drum a few turns to properly position the belt. Total E.T. is maybe 20 minutes and on a 1 - 10 scale for "degree of difficulty ". This is about a 2. Save the money and do it yourself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerMichael from Hudson FL

Rollers completely worn out

popped open top, removed two springs on lower end of front panel.took off same panel, pulled drum forward, pulled jesus clips from roller pins ,took off old rollers and replaced with new rollers and clips.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKeith from Lufkin TX

Dryer drum support rollers had worn out - drum dropped and rubbing.

I had already disassembled dryer to confirm problem, then I ordered rollers. Once rollers arrived ( and quickly I might add!) I replaced rollers and reassembled in less than 15 minutes - parts ordered were perfect fit.
Thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Drum Support Rollers

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

Customermark from Villa Park IL

Worn bearing on drum roller wheel

before i describe the repair let me tell you about the shipping. I ordered the parts early Friday afternoon and recieved then Sat. morning, almost like they were E-mailed to me. A++ The repair was a simple task that anyone that could find the problem could fix. WORD

Help other customers find the most helpful instructions.

Were these instructions helpful?