346703-1-S-Whirlpool-3406105           -Door Switch
346703-1-S-Whirlpool-3406105           -Door Switch 346703-2-S-Whirlpool-3406105           -Door Switch http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/8JKOXOFU.gif

Door Switch

PartSelect Number PS346703

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Will not shut off.
  • Compare At

    $19.07
  • You Save

    $3.18
  • Your Price

    $15.89
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 8 reviews What's this?
1-5 of 8
 

97 of 103 people found this instruction helpful

Parts Used

  • Door Switch

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJohn from Bethesda, MD

Dryer would stay on after opening the door. The switch that turns off the dryer when you open the door was not broken.

You open up the lint filter access door and remove the two small screws that hold it to the top of the dryer. Once they are removed, you insert a flat blade screwdriver under front-top of the unit and the top will pop off. Exerting a little pressure towards you will help lift to top off the mounts. There are no other screws to remove.
The new switch comes attached to a clip. You just pull off the old clip and replace it with the new one and discard the old switch.

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 29 people found this instruction helpful

Parts Used

  • Door Switch

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNick from Reynoldsburg, OH

Door switch - broken tab

Unplugged dryer, removed two screws from the lint trap area, pried up the top of the dryer to get to the switch, removed two screws securing the switch, unplugged the switch, plugged in the new one and reversed the procedure.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 12 people found this instruction helpful

Parts Used

  • Door Switch

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerMark Lariviere from NY, NY

Would not start

We were able to look at the diagram of the dryer to figure out how to access the part and then replace it. Fantastic! Your site is wonderful. The suggestion for the repair for not starting was right on the mark. The parts came very quickly, as well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 9 people found this instruction helpful

Parts Used

  • Door Switch

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerDean from New Bern, NC

Dryer kept running when door was open

changed out the switch. easy. about 20 minutes. part came quickly (2-3 days). great service. thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used

  • Door Switch

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGary from Ocean Springs, MS

Dryer kept spinning when the door opened

Came to Parts Select. Looked for door switch. Read what other people did. Part came in a few days took a few minutes to take old switch out (had to pry the plastic connection apart with little thin screwdriver). Everything was easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 8