345944-1-S-Whirlpool-339956            -Lint Trap Housing Seal
345944-1-S-Whirlpool-339956            -Lint Trap Housing Seal 345944-2-S-Whirlpool-339956            -Lint Trap Housing Seal http://www.partselect.com/Schematics/Maytag/1UWBSRZ4.gif

Lint Trap Housing Seal

PartSelect Number PS345944

This seal comes with the adhesive backing.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Takes too long to dry.
  • No heat or not enough heat.
  • Noisy.
  • Compare At

    $8.09
  • You Save

    $1.35
  • Your Price

    $6.74
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Lint Chute Seal

Part Number 347466

This seal comes with the adhesive backing.

Order within the next 9 hrs and your part ships today!
$8.28
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 3 reviews What's this?
1-3 of 3
 

11 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers, Wrench set
Customer: Eric from Fort Dodge, IA

Dryer drum not turning and no air circulating

replaced motor and drum rear seal as well as idler wheels, the old rear drum seal was completly worn out, since I had it all apart, I replaced lint chute and trap seals and belt and tensioner. I spent less money on parts than if I would have bought a new dryer. The motor was the main problem as the bearings were shot.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: David from Adkins, TX

Flame fadedout after unit got hot; problem turned out to be the solenoid coils

removed frt & rear panels & drum and lint chute for seal replacement replaced these components, problem didn't go away, ordered & replaced both gas valve coils (m series coil kit) problem solved

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Donald from Lusby, MD

The dryer stopped heating. I removed the back of the dryer to find a fried thermostat and wire.

I went on partsselect.com's web site, punched in the model number and easily found the parts I needed. Parts arrived in two days. Repairs went well, especially when my wife was my tool assistant! I recommend this site as a must for do it yourself repairs that will save you a lot of money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3