345444-1-S-Whirlpool-3396047           -Dryer Timer
345444-1-S-Whirlpool-3396047           -Dryer Timer 345444-2-S-Whirlpool-3396047           -Dryer Timer 345444-3-S-Whirlpool-3396047           -Dryer Timer

Dryer Timer

PartSelect Number PS345444

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $134.72
  • You Save

    $22.45
  • Your Price

    $112.27
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 5.0 / 5.0, 3 reviews What's this?
1-3 of 3
 

6 of 6 people found this instruction helpful

Parts Used

  • Dryer Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJames from Antioch IL

Dryer would not start unless the timer knob was held in a particular position.

REMARKABLE! Found the part easily on PartSelect website--pictures were really hlepful; ordered it and it arrived the next day!!

Unplugged the machine, took out a few screws and took a couple digital pictures of the way the old one was installed (picture is sometimes more accurate than memory). Pulled the wires off the old one, replace with the new one--entire job in probably 10-15 minutes. EASY!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Dryer Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerJohnny from Piney Flats TN

The timer on my dryer would buzz after a few minutes turning the dryer off.

First I unplugged the dryer then I used a nut driver to remove the back of the dryer. I removed two screws to remove the old timer . I replaced one wire at a time until I had all the wires transferred to the new timer.I then replaced the timer with two screws and then replaced the back with eight screws plugged in the dryer and turned it on. It worked just like new. Great price easy job. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Dryer Timer

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerMartin from Levittown PA

Timer was not working

I removed the 5 screws from the back upper cover,
removed the knob on the timer, removed the 2 screws from the rear of the timer, took 1 wire at a time off the old and put on the new, reassembled and tested. Note: I forgot to mention that the first thin i did was unplug the dryer! The repair was fast and easy and the dryer works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3