345113-1-S-Whirlpool-3392519           -Thermal Fuse
345113-1-S-Whirlpool-3392519           -Thermal Fuse 345113-2-S-Whirlpool-3392519           -Thermal Fuse 345113-3-S-Whirlpool-3392519           -Thermal Fuse http://www.partselect.com/Schematics/Whirlpool/SNBNEJXS.gif

Thermal Fuse

PartSelect Number PS345113

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16".

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Will Not Start.
  • Takes too long to dry.
  • Shuts off too soon.
  • Timer will not advance.
  • Will not tumble.
  • Will not shut off.
  • Too hot.
  • Touchpad does not respond.
  • Compare At

    $11.27
  • You Save

    $1.88
  • Your Price

    $9.39
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 270 reviews What's this?
 

64 of 77 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Roger from Hialeah, FL

Dryer running but not heating

Popped open rear access panel and logged on to website. Performed search for "dryer not heating" and came across helpful tips and ordered all components pertaining to heating system and removed and replaced them. Working better than better and saved myself hundreds of dollars. Highly recommend for those "do it yourselfers"!

Help other customers find the most helpful instructions.

Were these instructions helpful?

45 of 53 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Kent from Sebastopol, CA

No heat - everything else was functional

After 30 miutes of research on this website I felt confident to investigate the problem. Removal of the back cover is straightforward. Initially I did not appreciate and obstruction of the ductwork exitting the dryer. I bypassed the thermal fuse by removing the wires and temporarily taping them together and heat was restored. Knowing flow was OK exitting the dryer I investigated flow from the lint trap to the blower motor which is where the problem was located. In our case the lint filter was torn allowing many small objects and lint to near completely clog the pathway between the lint trap and the blower motor. It was difficult to appreaciate how obstructed that pathway was without removing the entire channel from the machine which was simple and required removing two screws at the lint trap opening followed by 3-4 screws on the back of the channel. Once removed, it was easy to appreaciate the debris clogging the channel and was easy to clean with a hose and running water. Replacement was a snap. The parts were oredered and sent in a day. I prophylactically replaced thermastats based upon a recommendation from another website. Replacing previous parts with new parts was a snap. Out the door we were up and running for around $100 (including new thermostats). The dryer repair man may go the way of the dinosaur.

Help other customers find the most helpful instructions.

Were these instructions helpful?

43 of 50 people found this instruction helpful

Parts Used:
  • Thermal Fuse
Level of Difficulty: A Bit Difficult
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Wrench set
Customer: John from Bluffton, SC

Dryer motor would not turn on

After looking at the schematic to see what was in line with the motor, I found the fuse as the first item. I pulled the fuse out and used a multimeter to ohm out the fuse. Upon using the meter I found that the fuse was bad. I typed into Google my part number that was on the fuse and the PartSelect Website came up as one of the choices to pick from. When the part arrived approx. two days later I installed the fuse by first unplugging the dryer and then removing the bottom panel and removing the fuse from the exhaust by using a small 1/4 inch wrench and pulling out the old fuse. I installed the wires on the new fuse and re-installed and put the 1/4 inch screw back in. I started the dryer after plugging it back in and it worked like it should have. Thank you for the part and I have recommended your website to other people already.

Help other customers find the most helpful instructions.

Were these instructions helpful?

33 of 37 people found this instruction helpful

Parts Used:
  • Thermal Fuse
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: charles from waukesha, WI

The dryer only blew cold air

actually i found your site before i even looked at the dryer,thats how i knew to check for the thermal fuse.
I ordered the part and it was on my door in 36
hours,pulled the two wires off the old fuse and installed the new,put the back cover on and it has been working ever since,thanks ( your in my bookmarks)

Help other customers find the most helpful instructions.

Were these instructions helpful?

33 of 41 people found this instruction helpful

Parts Used:
  • Thermal Fuse
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver
Customer: Nick from Brandon, FL

No power

My 14 year old son did it as I supervised! Pulled the dryer out on a dolly, unpluged the dyer, removed 9 hex head screws to remove the back cover, removed and replaced the thermal fuse, located next to the exhust outlet, set the cover back on, moved the dryer back in with the dolly. I had the thermal fuse over nighted to me for a total price of $35, figured I saved at least $150 on a service call by Whirpool.

Help other customers find the most helpful instructions.

Were these instructions helpful?