345113-1-S-Whirlpool-3392519           -Thermal Fuse
345113-1-S-Whirlpool-3392519           -Thermal Fuse 345113-2-S-Whirlpool-3392519           -Thermal Fuse 345113-3-S-Whirlpool-3392519           -Thermal Fuse http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/SNBNEJXS.gif

Thermal Fuse

PartSelect Number PS345113

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16".

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Will Not Start.
  • Takes too long to dry.
  • Shuts off too soon.
  • Will not tumble.
  • Timer will not advance.
  • Will not shut off.
  • Too hot.
  • Touchpad does not respond.
  • Compare At

    $10.79
  • You Save

    $1.80
  • Your Price

    $8.99
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 270 reviews What's this?
26-30 of 270
 

6 of 7 people found this instruction helpful

Parts Used

  • Thermal Fuse

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRebecca from Scarsdale, NY

Dryer would not start.

Unplug dryer from mains. Remove the back of the dryer. Thermal fuse is located on the left hand side near the bottom as you face the back of the dryer. Remove fuse and connect new fuse. Never repaired an appliance before and this was so easy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 15 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLynn from Novi, MI

No heat, burner will not lite

Replaced thermal fuse, cycling thermostat, igniter kit and thermostate. Dryer still does not work, still no heat.

Have ordered gas valve solinoids to try next.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerFrank from Wingdale, NY

Dryer would not stop. Heating problem also fixed

Followed the video .... Also installed another part. which was a kit. the video here showed the third wire being installed. The video on repair clinic did not show where to attach the third wire (orange wire). The Kit and the Thermostat was installed with 25 mins. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 19 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver

Customerlarry from decatur, IL

Dryer would't heat up and noticed a smell of something very hot just prior to dryer not heating up.

Prior to ordering parts i moved the dryer out and took the back off the dryer with a nutdriver. I noticed right a way the heating element was damaged and burnt up. I ordered the above parts and recieved them in two to three days. the parts on my dryer were easy to get to and I just matched up the parts i recieved and replaced them one at a time. It only took a nit driver to remove them and plug the wires back in to the new parts.
the dryer works like new again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 14 people found this instruction helpful

Parts Used

  • Thermal Fuse

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRyan from Mundelein, IL

Dryer wouldn't start

My 80 series Kenmore dryer wouldn't start so I looked online for a solution to the problem. One of the sites I found stated that the problem could be as simple as a thermal fuse if other potential issues could be ruled out. I ordered the part on a Monday from PartSelect with standard FedEx ground shipping - stated it could be 3-5 business days. To my amazement, the part arrived the next day! Awesome!!! I watched the video on the PartSelect site to make sure I knew how to fix it, then followed the easy instructions. All I needed to do was use the nutdriver to remove the back cover from the dryer, unplug the two wires going into the thermal fuse, remove the old fuse, and pop the new one in. Then I just plugged the wires into the new fuse, replaced the cover and voila, the dryer worked like a champ! Thank you PartSelect for saving me a needlessly high repair bill!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

26-30 of 270