![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Dryer Thermal Fuse WP3392519
Rated by 363 customers
Easy
30 - 60 mins
Ratings submitted by customers like you who bought this part.
Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.
Dryer Thermal Fuse Specifications
![How Buying OEM Parts Can Save You Time and Money How Buying OEM Parts Can Save You Time and Money](https://img.youtube.com/vi/d6AvOkulk_g/maxresdefault.jpg)
How Buying OEM Parts Can Save You Time and Money
Replacing your Whirlpool Dryer Dryer Thermal Fuse
![Replacing your Whirlpool Dryer Dryer Thermal Fuse Replacing your Whirlpool Dryer Dryer Thermal Fuse](https://img.youtube.com/vi/ajDWK7x1J5Q/maxresdefault.jpg)
How to Troubleshoot a Dryer That Doesn't Heat Properly
![How to Troubleshoot a Dryer That Doesn't Heat Properly How to Troubleshoot a Dryer That Doesn't Heat Properly](https://img.youtube.com/vi/nJybmNaO_7c/maxresdefault.jpg)
Test If Your Electrical Part is Failing - Multimeter Tool
![Test If Your Electrical Part is Failing - Multimeter Tool Test If Your Electrical Part is Failing - Multimeter Tool](https://img.youtube.com/vi/N0WW-aLqgSE/maxresdefault.jpg)
-
5 Stars
-
4 Stars
-
3 Stars
-
2 Stars
-
1 Star
- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
- < Prev
- 1
- 2
- 3
- Next >
It is not a 2 hr. repair, but I worked slowly, didn't want to make any mistakes. It would be good if everyone is aware of some of the above information and the YouTube video done by an individual on this particular dryer.
-
Jo from BANDON, OR
-
Difficulty Level:Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
-
Steve from HICO, TX
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Thermal fuse- also because it seams to fail a lot and I was already working on the dryer. Removed lower back panel. Found fuse. Unscrewed the one screw ... Read more . Disconnected fuse and put new one in. Kept old one as a back up.
Total time between replacing the thermal fuse and the timer-1/2 hr.
A little pricey, but the dryer is only 3 yrs old and I was able to fix it! Hope it will last us for several years.
-
Barb from SHARPSVILLE, PA
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
-
Stacey from CHUNCHULA, AL
-
Difficulty Level:Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Socket set
-
Tammy from PINEVILLE, MO
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers, Socket set
Ultimately it was the motor that failed, but replacing the start relay and thermal fuse was a simple task
-
David from COLLEGE STA, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Wrench (Adjustable)
-
Dale from PAOLA, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Socket set
I reviewed the awesome blueprint that I printed out of my specific model , which is provided by this great website. I located each area that I would need to make the replacement of parts, by highlighting it on the blueprint. I removed the nut at the dryer light, inside the dryer. Removed the light cover & ... Read more replaced the bulb, put the cover back on, tighten the nut.
I removed all the nuts from the back, remove the exhaust tube, removed the rear panel. I realized that the exhausted tube was kind of heavy. It was extremely clogged with lint so thick , I couldn't see through it & it was also holding water that weighed down the exhaust tube. So disgusting !! I immediately went to my HomeDepot to purchase a new 8' foiled exhaust tube & 2 elbow connectors. Installed it & reused the tightening clamps at each elbow . Wasn't expecting any of this in the plan. I realized that this was probably the culprit of the steamy dryer. I put the rear panel on, without installing the other two parts that I purchased. I put at load of wet laundry in the dry & ran it. The load was completely dry in the first cycle. Problem solved. I would like to say that this website gave me the resources, knowledge & confidence to believe that I could make the repair myself & that was the only reason I moved forward to complete the task. In a sense, this company has saved me,my family & our home from a potential fire. So people of the world please take the time to check your air flow visually inside the exhaust tube . Thank You PartSelect ??
-
Lisa from BLACK JACK, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
I tested main switch for different cycle operation. Main switch was worn out inside and not making good contact for soft cycles.
This dryer is 25 years old. I chose to replace all the sensors, fuses, ignitor, gas valve coils, cycle switch and thermostat. ... Read more
This was cost effective for me, because now, I actually have a good dryer that might just last another 25 years. I might replace the drive belt soon. I'll order from Parts Select. This was easy and fun. Thanks!
-
John T Lundy from Pittsburgh, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Nutdriver, Screw drivers, Wrench set
-
Richard from Trout Creek, MT
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
- < Prev
- 1
- 2
- 3
- Next >
Ask our experts a question about this part and we'll get back to you as soon as possible!
- < Prev
- 1
- 2
- 3
- Next >
249 people found this helpful.
180 people found this helpful.
162 people found this helpful.
68 people found this helpful.
59 people found this helpful.
49 people found this helpful.
43 people found this helpful.
30 people found this helpful.
29 people found this helpful.
26 people found this helpful.
- < Prev
- 1
- 2
- 3
- Next >
![Igniter Kit – Part Number: 279311](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334180-1-N-Whirlpool-279311-Igniter-Kit.jpg)
![Heating Element - 240V 5400W – Part Number: 279838](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/334313-1-N-Whirlpool-279838-Heating-Element-240V-5400W.jpg)
![Dryer Cycling Thermostat – Part Number: WP3387134](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741405-1-N-Whirlpool-WP3387134-Dryer-Cycling-Thermostat.jpg)
![Dryer Radiant Flame Sensor – Part Number: WP338906](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/11741429-1-N-Whirlpool-WP338906-Dryer-Radiant-Flame-Sensor.jpg)
![Thermal Cut-Off Fuse Kit – Part Number: W11050897](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/12070444-1-N-Whirlpool-W11050897-Thermal-Cut-Off-Fuse-Kit.jpg)
Manufacturer Part Number: WP3392519
![Customer Service Representative](https://partselectcom-gtcdcddbene3cpes.z01.azurefd.net/images/csr-partdetail.jpg)
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.