344958-1-S-Whirlpool-3390719           -Disposable Thermal Fuse - Two Terminal
344958-1-S-Whirlpool-3390719           -Disposable Thermal Fuse - Two Terminal 344958-2-S-Whirlpool-3390719           -Disposable Thermal Fuse - Two Terminal 344958-3-S-Whirlpool-3390719           -Disposable Thermal Fuse - Two Terminal http://www.partselect.com/Schematics/Whirlpool/2P1RJX1P.gif

Disposable Thermal Fuse - Two Terminal

PartSelect Number PS344958

This part attaches to the exhaust duct of your clothes dryer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Will Not Start.
  • Shuts off too soon.
  • Will not tumble.
  • Compare At

    $16.02
  • You Save

    $2.67
  • Your Price

    $13.35
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 12 reviews What's this?
1-5 of 12
 

90 of 165 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: JEFFERY from ABINGDON, VA

Dryer wouldn't dry

un pluged it then removed the hose took the back off took out the 2 screws out of each part replace it with the new parts , then pluged it back to make sure it would work and it did the very first time. i'm 1 happy roper owner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

40 of 54 people found this instruction helpful

Parts Used:
  • Disposable Thermal Fuse - Two Terminal
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Olive from Williamsburg, OH

Dryer wouldn't turn on

Removed the back of the dryer taking off the screws. Found the disposable thermal fuse. Unplugged the 2 blue wires connected to it. Removed the screws holding the part in. Replaced the old part. Reattached the blue wires. Put the back on the dryer. And voila! That simple!
I'm a 39 year old woman with absolutely no patience for tedious jobs, but this was so easy I felt good about doing it. And felt even better for saving lots of money by doing the repair myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 36 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Socket set
Customer: Russell from LA VERNE, CA

Dryer would not heat.

I checked parts select.com and followed the guide lines,ordered the correct parts thanks to the web site help.parts arrived in 2 days,A very easy install and back to work drying clothes.Thanks parts select.

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 16 people found this instruction helpful

Parts Used:
  • Disposable Thermal Fuse - Two Terminal
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Socket set
Customer: kevin from Saint Augustine, FL

The dryer stopped working and would not start.

After unplugging the dryer, I removed the bottom panel in front. Remove the the filter inside the dryer and remove the filter housing below. There you can see the thermal fuse on the air duct, its white with two blue wires. You can check it with a ohmmeter after removing the wires. If its open its bad. Its held in place with two sheet metal screws. After replacing the thermal fuse the dryer worked fine. However I would suggest cleaning the air duct and the outside discharge opening. Hope this helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 21 people found this instruction helpful

Parts Used:
  • Disposable Thermal Fuse - Two Terminal
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers, Socket set
Customer: Brad from Odessa, MO

Thermal fuse was bad.

Did an Ohm test on the old Thermal Fuse found it to be bad. Replaced it with a new and the dryer is back to working great. Your suggestions saved approximatley $150.

Thanks for the help.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 12