344087-1-M-Whirlpool-3379369-Upper-Wash-Assembly.jpg
344087-1-S-Whirlpool-3379369-Upper-Wash-Assembly.jpg 344087-2-S-Whirlpool-3379369-Upper-Wash-Assembly.jpg 344087-3-S-Whirlpool-3379369-Upper-Wash-Assembly.jpg

Upper Wash Assembly

PartSelect Number PS344087

NOTE: *Original may have two screw holes, only one screw is needed now.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly
  • Compare At

    $22.51
  • You Save

    $3.75
  • Your Price

    $18.76
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 NEXT > 16-19 of 19

 

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customertodd from woodstock IL

Broken upper wash arm stabalizer bracket...

very easy to fix..i replaced many other parts while i was at it..figured i d "upgrade". washes much better now....less noisy..

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCharles from Blue Jay CA

Hole in hose to upper spray arm, damaged top sprayer

Removed the upper spray arm and hose to rear of washer by detaching the hose clip at the back of the upper dish basket and removing the screw at the bottom of the spray arm. Reinstalled the new one piece hose assembly and the new upper spray arm by replacing the screw at the bottom of the spray arm and attaching the new hose clip at the back of the upper dish basket.

My original top spray unit was held in place by two screws. The new top spray unit uses only one screw but the second attachment point is still part of the new unit. I drilled a hole for the second screw. I removed the two screws that held my damaged top spray in place and removed the damaged top sprayer. The small hose to the top sprayer easily slides out of the unit when the screws are removed. I reinstalled the new top sprayer using the two original screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Upper Wash Assembly

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHenry from Long Beach CA

Dishes would not rinse

first we went to the local parts store and were told the dishwasher was too old.
I found you online and had the part in two days. It took less than 5 minutes and now it fixed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Upper Wash Assembly

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAlan from Enid OK

Broken part

The upper spray unit was broke, part select part search was easy to locate the item (showing a pacture). Part order was easy as well. it took me about 20 minutes to replace. I'm sure I saved at least 50.00 in just the home visit for a tec to come to my home.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 NEXT > 16-19 of 19