344005-1-M-Whirlpool-3378186-Middle-Wash-Arm-Tube-Holder.jpg
344005-1-S-Whirlpool-3378186-Middle-Wash-Arm-Tube-Holder.jpg 344005-2-S-Whirlpool-3378186-Middle-Wash-Arm-Tube-Holder.jpg

Middle Wash Arm Tube Holder

PartSelect Number PS344005

This holder should have a split in the ring at 3 o'clock position.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Compare At

    $16.39
  • You Save

    $2.73
  • Your Price

    $13.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 8 reviews What's this?
1-8 of 8
 

7 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

Customersaul from clarks summit PA

Dishracks old and worn

Did not have to do any repair, the parts for the dishwasher come with all the necessary parts and no tools were necessary. the wheels were snapped into place for the lower rack and the upper rack should needed to be place in the sliders. The Middle arm holder is not necessary as it comes standard.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerWendy from Wickenburg AZ

The 'nozzle' end of the arm tube fell into the bottom of the dishwasher, and was partially melted by the heating element.

One screw was taken out, the old arm removed, the new one put in place, then attached to the new arm tube holder. TADA!!!! Done.
I am a widow, and think I saved about $75.00 doing this job myself. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLaura from Marietta GA

The original, detachable hose portion developed a hole and needed replacement

Pretty simple. Hardest part was working the end clips of the slide to remove top rack. You simply need to squeeze the plastic clip in to slide it out. Once the top rack is out, it was an obvious philips head screw removal and new part replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCharles from Hopkins MN

Broken mount caused dishwasher to shoot water against door, caused leaking

Removed broker washer arm mount with screwdriver and replaced. New parts clipped right on to upper rack, no tools needed. Didn't really need to replace the tube holder but it was brittle so I put it in the order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMicaela from Essex MD

Mount for the upper spray arm was broken

After getting the model number of our dishwasher we checked for the parts on Part Select and found the diagrams very helpful in identifying the exact part we needed. When it arrived only days later we were able to attach it to the upper rack by the diagrams on Part Select in minutes. We tightened the screw and that was it! So happy to have my dishwasher working again like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerHugh from Millington TN

The upper spray arm was broken off

Looked up the model number, went on Google to find vendor. Found part in a drawing on vendor's website. Ordered the part for 2nd day delivery. Replaced the part in 10 minutes and started the dishwasher. No problems.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerStanley from Liverpool NY

Washer are retainer nut broken

The washer arm retainer nut was broken and the washer arm was dislodged Decided to replace the sprayarm and wash arm bearing ring as they looked worn. Middle wash arm tube holder had been broken but was wired together. Decide to replace it as well. Fedex deliver the package and I was running the dish washer fifteen minutes later. Great service and a simple repair

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Middle Wash Arm Tube Holder

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerColleen from Coram NY

Melted tube holder(melted after fell on coils below

After opening the bag the part came in I noticed the ring was sliced with an opening in it, unlike the old part.After calling the help line and explaining my delelma The person on the line read the instructions to me which detailed the part which explained that the part was supposed to have a cut in it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-8 of 8