343992-1-S-Whirlpool-3378144           -Middle Wash Arm Tube
343992-1-S-Whirlpool-3378144           -Middle Wash Arm Tube 343992-2-S-Whirlpool-3378144           -Middle Wash Arm Tube 343992-3-S-Whirlpool-3378144           -Middle Wash Arm Tube http://www.partselect.com/Schematics/Whirlpool/3RDUADFE.gif

Middle Wash Arm Tube

PartSelect Number PS343992

This tube attaches to your middle spray arm.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Compare At

    $22.42
  • You Save

    $3.74
  • Your Price

    $18.68
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Middle Wash Arm Tube Holder

Part Number 344005

This holder should have a split in the ring at 3 o'clock position.

$14.30
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 17 reviews What's this?
 

2 of 2 people found this instruction helpful

Parts Used:
  • Middle Wash Arm Tube
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Wrench set
Customer: Wayne from Indianapolis, IN

The upper tube on the dishwasher was worn out

The part arrived much sooner than i was ready for. with a square allen wrench I was able to install the tube in no time.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Wendy from Wickenburg, AZ

The 'nozzle' end of the arm tube fell into the bottom of the dishwasher, and was partially melted by the heating element.

One screw was taken out, the old arm removed, the new one put in place, then attached to the new arm tube holder. TADA!!!! Done.
I am a widow, and think I saved about $75.00 doing this job myself. Thank you.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Laura from Marietta, GA

The original, detachable hose portion developed a hole and needed replacement

Pretty simple. Hardest part was working the end clips of the slide to remove top rack. You simply need to squeeze the plastic clip in to slide it out. Once the top rack is out, it was an obvious philips head screw removal and new part replacement.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Middle Wash Arm Tube
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Paul from West Orange, NJ

Tube had a hole/ maybe from heat

I needed a #3 screwdriver. Cut the top of the ring of the tube holder, one snip from a pair of side cutters. Unscrew the old tube, screw in the new one, the old tube holder works fine with the cut in it . I didn't need to remove the top rack. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used:
  • Middle Wash Arm Tube
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Keith from Milan, TN

Old tube had deteriorated, come apart.

I removed the top rack, unscrewed the old tube assembly. The new tube assembly fit properly, the only problem was that it would not fit through the old hanger. I corrected this problem by cutting the top of the hanger with my pocket knife. It works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?