343923-1-M-Whirlpool-3376846-Spray-Arm-Seal.jpg
343923-1-S-Whirlpool-3376846-Spray-Arm-Seal.jpg 343923-2-S-Whirlpool-3376846-Spray-Arm-Seal.jpg 343923-3-S-Whirlpool-3376846-Spray-Arm-Seal.jpg

Spray Arm Seal

PartSelect Number PS343923

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Leaking water.
  • Unusual Noise.
  • Not draining.
  • Compare At

    $4.57
  • You Save

    $.76
  • Your Price

    $3.81
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Wash Arm Bearing Ring

Part Number 402231

This part will fit between the newer type lower wash arm and the wash arm retainer nut of your dishwasher.

$3.96
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 66 reviews What's this?
61-66 of 66
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGeorge from Carrollton TX

Wash arm retainer nutt broke

First I ordered the correct parts. The repair involved removing Wash Spray Arm inserting the Lower Spray Arm Seal, peplacing the Wash Spray Arm, then inserting Wash Spray Arm Bearing Ring, the inserting and hand tightening Wash Spray Arm Retainer Nut.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerLynda from Syracuse NY

Dishes weren't getting clean

After looking at the sprayarm, changing detergents and washing every speck off the dishes only to have them come out dirty I decided to replace the sprayarm seal and bearing ring. I didn't really need the sprayarm seal, but figured I had come that far I may as well. It went really well and now I have clean dishes. I spent $26 on parts but a service call is $70 and I still would have had to replace the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoseph from Spokane WA

Washing poorly, irregular noise in wash cycle

I removed the old parts and replaced them with new parts. It failed to solve the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerJudy from Arlington TX

Wouldn't wash

Called my son in law and he did it

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Wrench set

CustomerDavid from Hernando MS

Leaking dishwasher

Installed all parts. Dish washer still leaks. Wasted my time and money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerMelissa from The Colony TX

Wash arm retainer nut snapped in half

First I pulled the top half of the broken retainer nut out of the lower wash arm assembly. Then I took the was arm assembly off, removed the other half of the screw, set the lower spray arm seal into the lower wash arm assembly and screwed the wash arm retainer nut back in. As a bonus, I decided to replace the broken Wet agent cap. Had to use needle nose pliers to unscrew the broken bottom stuck in the well... That was the toughest part and it wasn't critical to the dishwasher functioning.

Help other customers find the most helpful instructions.

Were these instructions helpful?

61-66 of 66