342523-1-S-Whirlpool-3364290           -Timer Knob
342523-1-S-Whirlpool-3364290           -Timer Knob 342523-2-S-Whirlpool-3364290           -Timer Knob http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/NIPS120P.gif

Timer Knob

PartSelect Number PS342523

Note: This part has been updated by the manufacturer and now has metal threads.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Timer will not advance.
  • Compare At

    $22.33
  • You Save

    $3.72
  • Your Price

    $18.61
In Stock
Order within the next 5 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 27 reviews What's this?
1-5 of 27
 

27 of 30 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJoe from Covington, GA

Washer would not wash on "normal" cycle. Had to play with the knob to get it to run at all. Washer would not drain properly either.

I unplugged the washer from the electrical outlet.

I then removed the drain hose from the wall drain to allow me to turn the washer to gain access to the the back panel.

From the front, I then removed the plastic timer knob from the timer by unscrewing it. Then I pulled the plastic plate with the arrow on it to remove it. This exposed the screws that attached the timer to the control panel. I left them attached.

I then removed the two screws on the bottom of the front of the control panel (on each end) that attach the control panel to the washer.

I then went to the rear of the washer and removed the two screws on the top of the rear of the control panel.

I went back to the front and pulled the control panel forward and up to release it from the washer.

I then removed the two screws (that were under the plastic plate) that attached the timer to the panel and removed the timer from the panel.

Then I unplugged the wiring harness from the timer and removed the timer completely.

From there I reversed the procedure to install the new timer and knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 9 people found this instruction helpful

Parts Used

  • Timer Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerFrancois from Oakley, CA

Broken timer knob

un-screw old knob with pliers. Hand spin on the new one. Your PartSelect. Is the BEST!!! I ordered on-line Sunday night.Got the part Wedesday!! FAST!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 4 people found this instruction helpful

Parts Used

  • Timer Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerCarolyn from Albuquerque, NM

Broken timer knob

Removed remaining plastic piece of old broken knob by turning counter clockwise. Screwed on replacement knob by turning clockwise. Replacement knob is made of metal and I do not expect it to ever break. Soooo easy! Fast service and shipping!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Timer Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDavid from West Windsor, NJ

Original knob broke.

I used a pliers to remove the broken remains of the original knob. The new knob screwed on until it stopped. Good as new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Timer Knob

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerCarol from Springfield, OH

Knob broke off

Used pliers to take remaining broken plastic from post then screwed on new knob in 10 seconds. Easy as can be! I also loved the fact the new knob was made from metal where it threaded on instead of plastic like the original knob.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 27