342434-1-S-Whirlpool-3363394           -Direct Drive Water Pump
342434-1-S-Whirlpool-3363394           -Direct Drive Water Pump 342434-2-S-Whirlpool-3363394           -Direct Drive Water Pump 342434-3-S-Whirlpool-3363394           -Direct Drive Water Pump http://www.partselect.com/Schematics/Whirlpool/Whirlpool_Thumb/YDVXUGRU.gif

Direct Drive Water Pump

PartSelect Number PS342434

It is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Will not drain.
  • Pumps but will not spin.
  • Fills and drains at the same time.
  • Noisy.
  • Leaks water.
  • Will not fill with water.
  • Compare At

    $30.42
  • You Save

    $5.07
  • Your Price

    $25.35
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 195 reviews What's this?
 

17 of 19 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

Customeroscar from missouri city, TX

Water leak at pump

1. remove 2 hoses at pump using pliers to open hose clamps and sliding them out of the way.
2. remove 2 retainers holding pump with screwdriver.
3. remove old pump and install new pump
4. clamp pump using retaining clips
5. re-connect hoses

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 14 people found this instruction helpful

Parts Used

  • Direct Drive Water Pump

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerJohn from Oklahoma City, OK

Washing machine leaking water

First, I'm glad I found PartSelect. The previous posts for this repair told me exactly how to replace the pump: I unplugged the washer and moved it out away from the wall (did not need to disconnect water hoses). Then I tilted the washer back and propped it up so I could get underneath. Using pliers, slid hose clamps back and disconnected hoses from pump. Using a screwdriver, popped off two clips, top and bottom, that hold the pump in place. Pump then slides right off the shaft. Installation is the reverse. Make sure you align the shaft with the pump. Delivery of my part was FAST - ordered it and got it the next day!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Wrench (Adjustable)

CustomerJohn from Solana Beach, CA

Leaking drain pump. Obviously a common problem with this washer

Just turned the washer on its side, popped out the two retainer clips with pliers and screwdriver, pulled the pump out by hand, put the new one in and replaced one rusty clip with the new one from parts select, and used the other old one. I ordered the parts on Monday, and they came tuesday, even with the standard shipping. Also the website parts diagram and whole website design is good.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 16 people found this instruction helpful

Parts Used

  • Direct Drive Water Pump

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

Customermichael from westmoreland city, PA

Water leaking from pump

Removed the clips. Pulled out the old pump. After trying to get the new pump on the shaft of the motor, I realized that some corrosion had built up on the motor shaft. I got a small tack hammer and very lightly tapped the shaft to remove the corrosion. The pump then slid on the shaft with no problem. Replaced clips. Job complete.
The corrosion on the shaft cracked the plastic piece where the shaft connects and this is what caused the problem in the first place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 12 people found this instruction helpful

Parts Used

  • Direct Drive Water Pump

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers

Customermichael from weymouth, MA

Water leaking during run cycle

flip machine back remove two spring clamps and hoses remove two spring clamps and water pump save $500.+on a new washer

Help other customers find the most helpful instructions.

Were these instructions helpful?