| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerJim from Yucaipa CA
The wash cycle/on/off knob broke.
I used pliers to loosen the remnants of the old knob, then unscrewed it by hand. Then I screwed on the new knob, identical to the old one but better since it has a metal instead of plastic thread. Saved me a repair bill and waiting around half a day for a repairman to arrive.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerWanda from Discovery Bay CA
Top part of cycle dial broke off
I went on line and found this great company and thank goodness because I was using needle nose pliers to turn the dial.
I ordered the part and it was here within 5 days, I opened it up, screwed the dial onto the existing part and boom I was up and working again without having to use the pliers.
I wouldn't do it any other way when I have a problem from now on.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerMichael from San Diego CA
Old timer knob broke off
Removed the old broken pieces with pliers; screwed the new knob on. Done!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMichael from Oakland Gardens NY
Knob broken
it was so easy a caveman could have done it. i just took off the broken knob and put on the new and better knob. how much easier could it have been? thanks
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerWalter from Brookfield WI
The plastic part broke off
Finding thr part: Sears Kenmore diagram was impossible to read.
My SinL recommended PartSelec; It was an easy search with a picture of the exact part needed.
The part arrived a few days later and the problem is history.
Thanks for your great service
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerFrankie from Franklin WV
Knob broke off of washer
Was real easy just replaced the new knob where the other one came off. Was real please didn't need to replace my washing machine. Got the new knob in record time and was easy to replace.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMark from Whittier CA
Knob broke off
Got the new, Screwed it on and works good as new. Total time to screw the new knob on aboth 15 sec.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJohn from Orland CA
Broken timer knob
replaced with a screw on Knob.works great Thanks
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsWrench(Adjustable)
CustomerLester from Merrimac MA
Original (plastic) timer knob, broke in half.
Was able to unscrew the nut, which was still on the shaft, with an adjustable wrench and screw on the new knob.
The part was available, shipped in two days and arrived in three!
Not only is this knob METAL, but a perfect fit
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerBruce from mount prospect IL
Ths left and side rail of the snack bin broke
I pulled out the snack bin, took out the shelf, The rails slide and snap out. To install, all you do is snap in and slide the rail in place. 5 minute job.
The filter took 10 seconds
The timer know was for a Kenmore washing machine, and the install took 5 seconds
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerbilly from morrilton AR
Repair control knob
I shipped knob to son his wife installed before he got home.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAlisa from Holladay UT
The selection knob on the washer broke, the threaded center broke off the outside part of the knob.
Used pliers to twist the broken knob part off the threaded stem, replaced with the new one. Easy, took 5 minutes. Was happy I could find a replacement for an 18 year old washer! Using vice grips to turn the machine on every time I did laundry was a less-than-ideal situation! Thanks!
|
4 of 13 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsNutdriver, Screw drivers, Socket set
CustomerFelix A from Orlando FL
Ice maker was not working
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerDorothy from San Antonio TX
Plastic timer knob came off in my hand.. screw was worn.
I ordered the replacement knob on line. Was relieved to read that the replacement was made of metal instead of the plastic (why it was made of plastic boggles my mind) It arrived promply and I was able to screw it on rather quickly. I am a senior citizen and was glad I did not have to travel to a replacement location.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerSherry from Des Moines WA
Timer control knob (plastic) broke off
I unscrewed the broken piece remaining on the large screw on the dial, screwed the new knob in place, and I had a "new" washer! It was that simple!
|