| |
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerPam from Plainview NE
No problems
Removed the old panels with a phillips screwdriver. Removed the control panel and put the door latch and the control board into the new control panel the same way they were in the old one. Also have instructions to follow if needed. Replaced the front panel and put the screws back in. The toe and access panels went in easy, the only thing we had to do was touch up those screw with black paint as there were not new black screws in the kit. It was an easy and simple process.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerSandra from Hudson Falls NY
Front panel change
Removed 6 Screws , pulled panel out slightly and up to remove.Reversed the procedure for install.No problems at all.
|