| |
24 of 28 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSandra from McKinney TX
Wanted to replace white panel with stainless steel to match other appliances.
My husband removed the existing panel by removing the retaining screws. Installed the new panel and replaced the screws. Very pleased with the new look and how easy it was.
|
7 of 10 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerRonald from Northfield Center OH
Changing stove and dishwasher to match new frig.
I actually replaced parts on my black double stove to make it into stainless. We purchased a new frig and needed to replace parts on our stove and dishwasher so they would match. They look beautiful, all the parts shipped when they were suppose too. Ordering from this company was top notch. Would order again if needed.
|
7 of 10 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerDiana from Monroe Township NJ
Changed panel & control panel to stainless steel
I removed the nuts that held the panel, put the new one on replaced the same nuts. For control panel I unscrewed the two nuts that held it into place, carefully lifting the plug from the panel and replaced the new one, by putting the plug back in place and attaching the two nuts. Finished! Easy!
|
2 of 3 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerJoseph from Las Vegas NV
Change front panel
easy as long as you have the right tool to take the panel off, maybe they could include one for people who don't have a good selection of tools. Thankfully we did.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerPaul from Lubbock TX
Dated front panel
We recently installed all new stainless steel appliances, and were considering replacing the dishwasher as well (4 yr. old Kenmore, in good condition, energy star compliant, etc.). We decided to try to find a stainless front panel instead, and Kenmore said for that model they only came in black and white. But after calling Parts Select, they cross indexed our Kenmore model with a Whirlpool model that did come in stainless, and we simply ordered that front panel. The panel fit perfectly, only requiring the removal of 10 screws, and taking the insulation foam from the old panel and installing it in the new, then replacing the screws. Very simple, and economical, fix for our problem. Thanks Parts Select!
|
1 of 2 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerLowell from Manassas VA
Changed front panel from white to stainless steel
Opened dishwasher door,removed 6 Torx screws, changed out panel, replaced screws. VERY SIMPLE
|
0 of 1 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerbarbara from iselin NJ
Replaced from panel to stainless steel to match new appliances
Removed front panel, followed instructions and replaced front panel. So simple!
|
0 of 3 people found this instruction helpful
Parts Used
-
- Exterior Door Panel - Stainless Steel
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from North Hollywood CA
Front of my dishwasher was black and I wanted stainless steel
The only 'head scratcher' was finding my Torx Screw driver. Can't figure why these dishwashers use those fancy screws. Once you get those screws off, the panel comes right off.
The Stainless steel door I ordered came with a white foam block that the instructions advise to use. That piece didn't fit, so I skipped that step and it still looks perfect. I couldn't be happier with the result. The panel came perfectly in tact without any blemishes.
|