| |
12 of 16 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerThomas from Longwood FL
Stove heat was inconsistent and
After turning off the circuit breaker, I removed the elements and pans, raised the top and cut the wires to the receptacle assembly. Stripped the wires, slid on the shrink tubing and applied the wire nuts. I used a hair dryer rather than a match to shrink the tubing. Reinstalled the drip pans and inserted the elements. The instructions were clear and the project was easy. The stove works like new.
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerPedro from kent WA
Elements would not work at times
simply removed the old elements and receptacles and installed the new ones. The fit was perfect. My range looks new again.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMARIA from FENTON MO
Parts had wore out
More Than Amazing! I found you by searching google and using the make/model of my stove. The photos were so helpful, it made ordering a breeze. The parts arrived as if by magic! (within 2 days). I do a lot of online ordering from different stores and all I can say is that your service was above all of them. I use my stove daily. Not only that, the new parts made my stove look brand new. P.s. I never respond to survey's unless they deserve it.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Surface Element - 8" - 2100W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMarlene from Charleston SC
Surface burner heating element broken
took out old element, replaced with new.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Surface Element - 8" - 2100W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJulie from Salt Lake City UT
The heating element on the left front burner was out
Pulled the old one out and plugged the new one in. It was that simple!
|