| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customermark from fredericksburg VA
Oven would not light
replaced the igniter in oven
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoshua from Prairieville LA
Oven would not get hot but broiler would
1. Removed door by pulling up on it. 2. Removed the floor panel 3. Unscrewed the old igniter 4. Unpluged the igniter from the oven 5. Screwed in the new igniter 6. Plugged in the wire to the oven 7. Put back the floor panel 8. Re-attached the door
|