3407167-1-S-Whirlpool-W10247599-VALVE-INLT
3407167-1-S-Whirlpool-W10247599-VALVE-INLT 3407167-2-S-Whirlpool-W10247599-VALVE-INLT 3407167-3-S-Whirlpool-W10247599-VALVE-INLT

VALVE-INLT

PartSelect Number PS3407167

Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Not dispensing water.
  • Ice maker not making ice.
  • Compare At

    $86.68
  • You Save

    $14.45
  • Your Price

    $72.23
In Stock
Order within the next 17 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 10 reviews What's this?
1-10 of 10
 

18 of 21 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench set

CustomerKen from Waterford MI

Water dispensor in door did not work

After I pull out the fridge, turn off and remove the water supply line. I removed the screws that held the water valve in place. Once I pulled the water valve out, I discounted the two internal water lines, (one for the ice cub tray and the water in the door) and then removed the two sets of wires connecting to it. I then replaced the Water Valve, reconnected the two sets of wires, replaced the two internal water lines, as well as the supply line. Srewed the water valve back in and tested the water in the door. Everything worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 15 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerRonald from Delaware OH

Icemaker stopped making ice.

After doing some research it appeared that the water valve was the culprit. I don't have the expertise to test the old valve but I did try adding water manually to the icemaker and it spit out the cubes so I figured the icemaker itself was ok. I ordered the new water valve on a Friday morning and it was on my doorstep the next morning. This was standard delivery!
I removed a few screws at the back of the refrigerator that holds the valve. Pulled the old one out, removed three hoses and two electrical connections. Reconnected the same on the new valve and reinstalled it. Later that day the ice cubes started dropping again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 10 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Wrench set

CustomerDavid from Augusta ME

Water was leaking by the dispencer

First I unplugged the refrigerater and turned off the water and disconnected the water line. I then removed the two screws that hold the element in place, pulled the element out about 3 inches and disconnected the two wires. Then I disconnected the two water hoses, replaced the old valve with the new one and proceeded to connect the water lines and the electrical connections, screwed the element back into place connected the water feed, and connected the electrical line and everything works!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Wrench(Adjustable)

CustomerAlan from New Bedford MA

Solenoids failed to supply water for drinking and to make ice

First check your water source. The supply valve might be clogged, then the operating switches and timer to make sure they work . Remove old valve set and open them to clean the strainers of any debrie. Everything was clean for me. I purchased a new valve set and replaced it, easy enough. The tubing fittings where different but with a little modification the tubes fit just right.
Apparently the plungers of the solenoid valves wear and don't open enough.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers, Wrench set

CustomerRalph from Spring Hill FL

Door cold water dispenser stopped giving water

I turned off the supply water and easily removed the existing water valve, The difficulty encountered was that the mounting bracket did not match the existing mounting bracket. I was able to modify the new mounting bracket buy drilling two holes which mated with the existing mounting bracket screw holes. Then the parts went together easily and the water dipenser works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 3 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Wrench(Adjustable)

CustomerWade from Hickory NC

Not enough ice, hollow ice cubes,

romoved the cover on back of Refrig. romoved the water inlet valve (water and ice maker valve) replaced the old one with new just as removed and now it is making plenty of ice.

Part was about $50 ---saved the service call and labor charge completely.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Wrench(Adjustable)

CustomerJoseph from St Louis MO

Ice cubes were hollow in side of the cube.

Removed the back of the refrigerator. Located the valve. Turned off the water to the ice maker and cold water dispenser. Disconnected the main water line to the valve. Disconnected the valve from inside the back of the refrigerator.Disconnected lines to ice maker and cold water dispenser after marking the lines appropriately. Replaced the valve .Reconnected the cold water and the ice maker lines to the appropriate intact tubes on the valve. Put small amount of water sealer on the intake tubes before reconnecting the tubes and the lines. Reconnected the main water line after water sealer gel applied. Turned on water to test for leaks. NO leaks. Reconnected valve to refrigerator . Had to drill new fastening hole since old holes did not match up to new holes. replaced refrigerator back .

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench(Adjustable)

Customernicholas from richmond KY

Not making ice

This is a very easy fix. Turn off the water and remove the line from the valve. Remove two the screws on
the bracket on the back of the unit and then remove the two screws holding the valve to the
bracket remove the two water lines from the valve.
then do everything in reverse. Turn on the water.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerEdward from Dublin OH

Water was dripping from the cold water supply

Knowing that the only thing that could cause the water to drip and over flow from the reservoir I ordered the dual water valve and replaced it. This is the second time I had to replace this, the first time was when the ice cubes started getting thin. The vaulve is located on the back of the fridge, it only takes two screws, two wire connectors and one in and two out water lines to remove. After out the bracket has to be removed from the old and put on the new. Then just reverse what was done to remove it and your done. I went ahead and ran a full glass of water and about thirty minutes of new ice to make sure any dirt ran through before using it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • VALVE-INLT

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers, Wrench set

CustomerWILLIAM from NORTH FORT MYERS FL

Water continued to run slow for about 3 sec after removing the glass which most of us do quickley

Replaced the valve but I still have the same problem. I thought the new valve would be the trick. I can hear the valve working just as soon as I move the glass out just a little but the dripping still is there ,it is a pain as it will fill the tub if you are not thinking and friends are used a unit that stops completly as the glass is removed . any suggestions doanew@aol.com

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-10 of 10