Drive Motor - 10 Tooth WPW10247536

Hi Gim, Thank you for your question. We do not have any information on the voltage for this motor, but it is coming up under your model number and it should work. To verify the voltage you will need to contact Whirlpool for information. Their telephone number is 1-866-698-2538. I hope this helps. Thank you and have a great day!

Hello Wai, thank you for the question. We have researched and found that the part you mentioned fits your model. We hope this information helps!

Hi Brian, Thank you for writing. You can place the wires on either terminal, 1 or 2, and it will work properly. The terminals are universal. Good luck with the repair!

Hi Juliane, thank you for contacting us. If the attachment or the mixing bowl is not properly installed or is interfering with the mixer's movement, it can cause a humming sound. Ensure that everything is properly fitted and secure. If you are trying to mix a heavy or dense mixture, the motor might struggle and produce a humming noise. Try reducing the amount of ingredients you are mixing at a time. If you are mixing tough ingredients or kneading a heavy dough, the motor might be straining. This can produce a humming sound. Consider allowing the motor to rest for a few minutes and then continuing. If this does not help, sometimes, a humming noise can be caused by the need for lubrication in the motor or gears. We recommend replacing the gear, part number PS11748374, and re-pack with grease. We hope this sorts out your problem!

Hi Joe, Thank you for your question. It is always recommended to use the motor that is designed for your appliance. The part number listed under your model number for the motor is PS11751025. I hope this helps. Thank you and have a great day!

Hello Matias, Thank you for your inquiry. We show that part is only sold as part of the motor assembly. Hope this helps!

Hello Steve, Thank you for the question. The Brushes for the motor are not cold separate from the Motor its self. The Motor will need to be replaced. We hope this helps!

Hola Jose, Gracias por tu consulta. Estamos demostrando que este motor ronda los 450 vatios. Esperamos que esto ayude.

Hi Johan, thank you for the question. According to our research, the carbon brushes are not sold separately and are only sold as a part of the motor, part number PS11751025. The motor will need to be replaced. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Hi Quintin, thank you for reaching out. We have researched and found that the drive motor, part number PS11751025, will fit your model. If you need help placing an order, customer service is open 7 days a week!