340607-1-S-Whirlpool-3347034           -Vacuum Break
340607-1-S-Whirlpool-3347034           -Vacuum Break 340607-2-S-Whirlpool-3347034           -Vacuum Break http://www.partselect.com/Schematics/Maytag/YBNQQEWJ.gif

Vacuum Break

PartSelect Number PS340607

Manufacturer Part Number 3347034
Manufactured by Whirlpool

This part prevents wash water from being sucked back into the main water supply lines.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking.
  • Compare At

    $20.72
  • You Save

    $3.45
  • Your Price

    $17.27
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Russell from Chicago, IL

Out of ballance

removed two phillips screws from control panel. lifted panel to reveal two clips on both sides of machine. used flathead screwdriver to remove clips. tilted whole body up and away. pushed drum towards first spring and removed it . installation was reverse of procedure. did not fix it because basket had rusted at shaft bottom under agitator and put basket out of balance.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: Morris from Tampa, FL

Cold and hot water function did not work.

I first unplugged the power.Then I turned off the water supply and disconnected the water hoses from the unit.Afterwards,I unscrewed and opened the back panel.I then removed and replaced ordered parts.I reinstalled the back panel and hoses.I turned on the water supply and plug in the power cord.I tested the cold and hot water functions and it worked like a charm.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2